New Year Service Overdue Bug

[Keato]

I’ve got about 4k miles to go before my next service at the dealer - but the double click trick on the left stalk to clear the error message has stopped working - has anyone else had this problem?

It happens sometimes. Press the OK button on the right side of steering wheel and then try again with the stalk

 

[CrazyOldMan]

It happens sometimes. Press the OK button on the right side of steering wheel and then try again with the stalk

Good suggestion- will try that tomorrow.

 

[Sela_2024]

I’ve got about 4k miles to go before my next service at the dealer - but the double click trick on the left stalk to clear the error message has stopped working - has anyone else had this problem?

Happened to me but it was temporary. Next time I drove it states work no fine.

 

[Cheshire cat]

My reset trick seems to have stopped also. I just ignore it for now.

 

[Tazzieman]

Getting close to the predicted 1000 posts on this thread!

 

[RB60]

It does not work for me.

 

[CrazyOldMan]

It happens sometimes. Press the OK button on the right side of steering wheel and then try again with the stalk

That seemed to work this morning - not sure why, but it did, so muchos gracias!

 

[singlefin]

It happens sometimes. Press the OK button on the right side of steering wheel and then try again with the stalk

This is what I found to work or use one of the CCI buttons like fav to get the cursor out of the range remaining field.

 

[skinny_tom]

Use the center console dial to move the selection off the warning, then try again.

 

[IslandFalconer]

I’ve got about 4k miles to go before my next service at the dealer - but the double click trick on the left stalk to clear the error message has stopped working - has anyone else had this problem?

Never worked for me. I have a 23’ prototype and it just cycles through. Not sure it’s a reliable fix

 

[CrazyOldMan]

Never worked for me. I have a 23’ prototype and it just cycles through. Not sure it’s a reliable fix

Try the OK or center dial - it could be that the left stalk is zeroed in on a different command (not sure how to phrase that). I got it to work (again) this morning with the OK button, after 3 days without being able to get it to work (it was working before that)

 

[Keato]

Had my service today. So nice to not have the warning any more.

 

[Andrew L]

I picked up my 2023 Fieldmaster on Saturday and was, of course, keen to see how overdue my service would be.
32,450 days!
That means it was last serviced on the 5th of January 1936.
Might do a precautionary oil change cos it must be sticky by now....

 

[DoubleDoom]

The clicking to clear it is working for me. The key is to click on first when the message is on the screen (to select the message) and then click again to clear it. If you click whilst the message isnt on the screen, you cannot clear it until the next restart.

 

[Keato]

The clicking to clear it is working for me. The key is to click on first when the message is on the screen (to select the message) and then click again to clear it. If you click whilst the message isnt on the screen, you cannot clear it until the next restart.

Unless you press enter and then wait for the message come back again before pressing the button