The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.

INEOS AIR FILTER PART NUMBERS (also Air Cabin filter)

I tried replacing the cabin air filter with a Mann CUK 25001 and it is way off in size. That means all of the other interchange part numbers are also wrong including the WIX Part Number 24255. It took some searching but I did find the OEM filter manufacturer and part number. It's a EuroGielle Sivento P448 (https://www.eurogielle.it/en/catalogue/7135/). Now if only we can find something the same size. 219mm x 212mm x 25mm.

View attachment 7899114
I searched by dimensions in the WIX website, and this part matches exactly except for 1mm difference in width. Has it been mentioned before, or should I buy one and be the guinea pig?
 
I searched by dimensions in the WIX website, and this part matches exactly except for 1mm difference in width. Has it been mentioned before, or should I buy one and be the guinea pig?
That should fit. I just ordered one on amazon and will give it a try on Sunday. If it is true size then we should be good. Thank you for finding this. I don't recall seeing that part number before and a forum search for Wix 49082 comes back empty. Well done!
 
Are you sure the arrow points towards the interior? My dealer had installed it with the arrow pointed towards the engine.
LeeroyJ haven’t seen the manual (#&h&!!) so all I can tell you is the orientation of mine as it came direct from the factory which was pointed towards the rear or as Commodore says, towards the glove box.
 
Last edited:
Back
Top Bottom