The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.

Canopy, Flat tray, Truck Caps for the Quartermaster

Here are some pictures of the Dirtbox tray, some tweaks and order books will be open. I have asked if they could color match the half canopy doors and the under tray doors plus the side boards.
 

Attachments

  • image_3.jpg
    image_3.jpg
    275.6 KB · Views: 6
  • image_2.jpg
    image_2.jpg
    178.6 KB · Views: 7
  • image_0.jpg
    image_0.jpg
    195.5 KB · Views: 7
  • image_1.jpg
    image_1.jpg
    295.3 KB · Views: 6
  • image_2.png
    image_2.png
    150.4 KB · Views: 6
  • image_1 (1).png
    image_1 (1).png
    183.8 KB · Views: 6
I called Couch off-road to learn more about the tray and spoke with Jay Couch. He spent 30 mins giving me the low down. He is more than excited about the outcome and I am on the Dirtbox train. I wish I had a transcript of our call as every second he gave such good info.
Off of memory.
The size: he has extended the tray to over 6 feet in length and width is same size as width to door handles.
20 gallon water tank
Spare tire is mount under the bed with a slide/box to hold it. It opens
19/20 gallon spare gas tank with ability to fit another 19 gallons by head rack.
The frame sits on a sub frame 3 point sub frame. The reasoning is the QM chassis is very stiff. He wanted to minimize flex between the flat tray and bed.
Rear winch mount, his test winch is 13k
With the added weight he is going with 1000 springs.
Here are some pictures of subframe, the spare tire hatch, rear winch

He has my attention for the spare tire location alone
 
Back
Top Bottom