The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.

After market cabin filter option

Local time
5:51 PM
Joined
Jan 10, 2025
Messages
47
Location
San Antonio
Hello, I finally found a replacement non-OEM aftermarket air filter off of Amazon. It fits perfectly. I’m going to post a picture of it. The big difference is it’s only 9 bucks.
 

Attachments

  • IMG_7388.jpeg
    IMG_7388.jpeg
    3.9 MB · Views: 30
  • IMG_7385.jpeg
    IMG_7385.jpeg
    3.7 MB · Views: 28
Hello, I finally found a replacement non-OEM aftermarket air filter off of Amazon. It fits perfectly. I’m going to post a picture of it. The big difference is it’s only 9 bucks.
Got a link to the product on Amazon?
 
I found it.

Interesting what you get when you search using CF10729 (another part number used by Amazon), rather than MAF0729 (the Moselny part number).
 
sh1t, I've just purchased 2xOEM ones at about £55!
 
Where do y'all buy your IA/OEM parts at a healthy discount? I know my way around Toyota (e.g. partsouq), BMW (getbmwparts) and Porsche (Suncoast), but new to the IA scene. Thanks.
I’m watching the answers you get intently. OEM parts are expensive so i would like to find alternative pattern parts if possible or originals from a different supplier at a discount.
 
Where do y'all buy your IA/OEM parts at a healthy discount? I know my way around Toyota (e.g. partsouq), BMW (getbmwparts) and Porsche (Suncoast), but new to the IA scene. Thanks.
Let us know when you find it. Nothing obvious so far.
 
A while ago, I bought the Blue Print ADBP250065 HVAC filter because the dimensions seemed to fit and it only cost about 9,- Euros.
Unfortunately, it didn't fit. This wasn't because the filter element was too big, but rather because the plastic frame to which the filter material was attached. I wanted to use it for something else, but then I cut back the plastic frame with a knife so that the entire filter was only 25 mm high. Now it fits!!!
Unfortunately, this is only a temporary solution and I don't recommend it here. Therefore, I will continue to look for an affordable filter alternative that can be installed without any tampering.
 
Back
Top Bottom