wheels

hi, when I had the 110 td5 I was used to swapping the wheels (front rear) every 10,000km. Is it advisable to follow that practice with the grenadier too? which scheme do you use? only front / rear inversion or also right / left as per attachment?

Reaching the point where I need to finalize my configuration and spec. Currently have an Inky Black Trialmaster w/locking diffs/winch safari windows and 18" steel wheels on order. My off-road use will be "mild" by some standards. No Moab trips planned or overlanding, more like sloppy secondary...

My Grenadier lifted on Eibach springs, factory wheels on BFG KO2 295 70 18’s.

Good morning all Wondering if anyone has any information about the factory load ratings of the 17" Alloy rims or any of the rims specifically offered from factory. Currently in the process of analysing the rear housing for an axle load rating increase for GVM purposes and cannot find any...

Selling my factory steel wheels and BFG KO2’s. Swapped out to Reikas and Toyo RT trails. The wheels and tires have less than 500 miles on them. They’re premounted and balanced but do not have tpms in them selling all 5 for $2000.00.

Check these out! available in 17x8 +35mm offset https://reikavs.com/ineos/grenadier/2022-2024/17x8-r35v2500-bronze-r35780356317/

Does anyone have experience with Owl Vans wheels? They historically have specialized on offroad vans, it seems, but found they have some IG wheels/tires with dual valves. They are advertised as rugged, durable and with very high weight ratings for each individual wheel, but are lighter than...

My configuration when I submitted my order back in May 2023 had 17” Steel on Bridgetown tires, but I knew I had a change of thought instantly and wanted the alloy + BFGoodrich. I remember when I paid for my reservation that we could make any changes when the dealers were announced (contact...

After some coin and wait, my Grenadier received almost-body-colored wheels. Now the tires look small. Hmmm.... By the way, the set of 5 factory black steel wheels is up for grabs - will post it in Classifieds soon.

I've scrubbed the entire forum and read through several posts, yet, no ongoing talks about the 20" rims. There was a mention once but only one response on it. I'm not looking into wrapping them with 35in tires, looking more into 285/55r20 BFG KO2s which have a diameter of 32.3 in. Seeing that...

I have had my eyes on them. I think they will look the bit, but would love to see a pic of them mounted on a IG. Cheers.

Way to go INEOS forum! Barely 24 hours after posting yesterday, another Enos forum member and myself have made A successful swap of alloy wheels for steel wheels. All was well for the first 10 miles and then we both got a TPMS error message “Tyre pressure sensor lost” and a yellow warning...

Anyone in the US want to sell me their 18” steel wheels? Would also entertain trading for my brand new 18” alloys. Follow up question – anyone know where there is a new set of 18 inch steel wheels for sale in the US? My intention is to paint the steel wheels, the off-white color to match the...

Anyone in the US want to sell me their 18” steel wheels? Would also entertain trading for my brand new18” alloys. Follow up question – anyone know where there is a new set of 18 inch steel wheels for sale in the US?

I am starting to look for some alloys, these are for Sprinters, have the correct BCD. Have the “Boost alloys” look https://www.tunershop.com/rial-transporter-7-0x17-et57-6x130-17-wheel-polar-silver-tp70757m91.html?srsltid=AfmBOopqN6mmnC_X8_mVopI8T5HNAZAguGmgX6fRBeSOWayTv_YZp-kNKV8

If you ordered a Gren with 17" wheels (aluminum or steel) and are replacing them with aftermarket rims; I might be interested in taking the originals off your hands.

Anyone put on 33"s on 18" wheel? All I am seeing in the threads is 33" on 17" wheels?

As the question states are there issues with the TPMS? I knew there was in the past but wasn’t sure if it was fixed with the software update.

17 x 7.5 / 6 x 130 / 50mm offset Methods? And, what's the lug bolt thread spec?

I'm am upgrading my 18" alloys for new wheels and 285/70/17 tires. What tire rating can i get away with for city driving with the occasional off road park driving and hunting? Can i get a C rated tire and be fine? OR, do i need a minimum of D from the get go. I don't want a super stiff...

The Black Rhino Yellowstone or Stadium wheels come in 16"and 17" diameters (8" wide) and 38 and 45 mm offsets. Can 16" wheels fit a Grenny without interfering with the brakes? These offsets are only 7 mm difference. Which would be preferred? I've run 16"ers for decades on many 4x4's but now...

I would like to begin this thread to help me, and hopefully others, as I decide to figure out the aftermarket wheel situation. So this is what I ask: 1 - Please post a few photos of your wheel and tire setup 2 - Identify the make and size of the wheel including the offset (if possible) 3 -...

Posting my new setup which was fitted today. tyres: MAXXIS RAZR AT811 285/70/17’s wheels: Black Rhino Stadium, 6x130, offset +45mm (rare offset in this specific wheel) Haven't driven enough to notice fuel consumption difference etc. Handles great so far though. Getting tinting done next...

I can't decide if I take the 17" Steel or Alu Wheels on my TRIALMASTER :-( One decision point would be the weight of the Wheels --> if there is a big difference, I would go with Alu Wheels :-) Is someone aware of the weight difference between the two options? Any other important decision points?

Hello all… does anybody know what the thread pitch is? Need to get lug nuts for my aftermarket wheels and I can’t seem to find any information on this. Please help 🙏🏻

Quick q - what is the advantage/disadvantage to 17" versus 18" alloys? My TrialMaster would probably see more road use than off road for day to day use.

Things you don't notice until they're right under your nose...

So today I took the front wheels off to have a look around: But before I did, I thought I'd try and establish a baseline for backlash in the front differential/halfshafts/hubs. I got @ 20mm at the wheels before I could see the front propshaft turn. I tried later using just the brake disk and...

Seems like we don’t have a classified section yet, maybe we should get one? Anyway, I am buying the grenadier that has become available as mentioned in the sick of waiting thread. It has the 18” steel wheels and BFG tyres and I need 17‘s so if anyone is looking for a spare / winter set they...

Will the spare tyre be a full 5th rim matching the other 4 or a steel one?

post your pics. seems like the upgraded price from the 17 to the 18 will around $1000 usd more

I'm curious if anyone has seen this in person during their IG test drives or deliveries. I'm not asking for the whole rim cover but just enough for the hub itself and maybe the around the lugs. Something like the picture below for reference. I'm liking the steel wheel look but I'd enjoy it more...

Hi All, Does anyone know what the Grenadier 17 inch steel wheel rim profile is? Is it 17inch X 8inch or 17 inch X 10inch? Thanks in advance

Third party rims are now available, in Australia, for the INEOS Grenadier. The AMG Australia website has a selection here: https://www.amgaustralia.com/wheels/vehicles/ineos/2183/Grenadier/2023 You need to click on your model to see the rims fitted to the Grenadier. Three rims available at...

I was surprised to see the option for both 17 and 18 inch steel wheels. I understand the appeal of the larger 18 inch with the alloys, but why offer both a 17 and an 18 in the steel wheels? If you're looking at the steelies, you're likely going for the off-road advantages. Anyone spec'ing the...

Not sure I've seen these mentioned here, so I thought I'd post links to the Method Race Wheels - Bead Grip series for those interested in fitting alloys to their IG. https://www.methodracewheels.com/pages/bead-grip The three following wheel styles are available in the correct bolt pattern...