Wipers lifting

[Dokatd]

anyone else find that their wipers are completely lifting off the glass as it changes directions. Mine and more specifically my passenger side wiper lifts clear off the glass at the end of the stroke about 3/8" or so. It completely misses a section because of it. Very bizarre.

 

[Tazzieman]

anyone else find that their wipers are completely lifting off the glass as it changes directions. Mine and more specifically my passenger side wiper lifts clear off the glass at the end of the stroke about 3/8" or so. It completely misses a section because of it. Very bizarre.

Many of us have found the stock blades to be "wanting" and duly replaced them with something better.

 

[Dokatd]

Many of us have found the stock blades to be "wanting" and duly replaced them with something better.

Fair enough, but my wipers are fully lifting off the windscreen. They literally stop touching the glass as they approach the return cycle and remain off the glass until they start returning and get back to the same point. The wipers are literally off the glass for 6" or so.

 

[Tazzieman]

Fair enough, but my wipers are fully lifting off the windscreen. They literally stop touching the glass as they approach the return cycle and remain off the glass until they start returning and get back to the same point. The wipers are literally off the glass for 6" or so.

I would deduce either the blades are rogered or the arms are bent/maladjusted.
I'd take the blades off and see if they appear faulty.
At the end of the day you'll need/want to replace them anyway. Unless Ineos has improved their supplier since the early models.

 

[jwb15]

my blades lift off the glass upon return
thank you for the above info

 

[Dokatd]

It's certainly not the blades, they are good enough. They completely lift off the glass not making contact anymore. It's like the wiper arms run out of range. It's 100% a warranty issue. Just wondering if it's a common problem at all. I could easily bend the arms a touch, but that's not the point.

 

[Shopkeep]

Have not had this issue but I bought some cheap arse 16"/400mm Michelin "Guardian Beam" wiper blades from Costco with low expectations and have been very happy with them, might be worth a try to see if it is just crusty blades. Also treated the windscreen with not cheap arse Chemical Guys Hydroslick, very slick indeed.

 

[TheDocAUS]

I installed Wipertech wipers and all my wiper problems disappeared.

 

[Zimm]

is the stud the arm mounts to bent?

 

[Tazzieman]

I installed Wipertech wipers and all my wiper problems disappeared.

Arghh that they do!

 

[Dokatd]

is the stud the arm mounts to bent?

Thank you for understanding my issue. Once the wipers leave the glass it no longer can be the wipers themselves.

It's weird, but it does seem like the rotation axis of the wiper arms is off.

 

[CountyV8]

Thank you for understanding my issue. Once the wipers leave the glass it no longer can be the wipers themselves.

It's weird, but it does seem like the rotation axis of the wiper arms is off.

Are any of the mounting bolts missing from the assembly or have come lose making the axles misaligned ?????? hold one and try to move it but they could be bent from shipping damage have seen worse hope this helps.

 

[LeeroyJ]

Thank you for understanding my issue. Once the wipers leave the glass it no longer can be the wipers themselves.

It's weird, but it does seem like the rotation axis of the wiper arms is off.

Is this just at speed, or at all times?

 

[Dokatd]

Is this just at speed, or at all times?

Just sitting in the driveway

 

[LeeroyJ]

Just sitting in the driveway

Definitely some sort of problem with the arms or mounts then.

 

[RYAustralia]

Arghh that they do!

I switched my gren to Bosch blades. Same benefit as wiper tech. Have had good results with both brands with multiple vehicles. Except for highly curved windscreen on my wife’s mini countryman - that needs OEM wipers - all the third party brands we tried lift at highest curved windscreen sections including wiper tech . Obviously not an issue for the grenadier which has zero curve on the slab!

 

[Zimm]

Almost sounds like the Motor mount is lose, and the assembly is shifting. Try to “stop” it at the top and see if it moves.