Sill water tanks

[OZZA]

Watching this space as I’m interested in a water storage solution.

 

[Zimonya]

I am in a slight predicament as I am trying to protect my IP.
The jigs are made. The system picks up on all of the factory points, so it is a retro-fit system. I am currently driving around with it in different states of ‘water level’ to test for handling irregularities (none so far). Also testing for pressure bleed (none so far).
Where are you based Logsplitter, as I am happy to show you the system to get your feedback?
I will discuss with my working partner (filter manufacturer) on how best to proceed on here.
I have another system not related to water storage that I am very excited about but again trying to protect IP.
Bear with me!

I hope you are well

How is the development work progressing?

 

[ICI Fuselier]

Sorry for the delay, I missed this response. I have been covering more mileage ahead of getting the finalised version together along with tying up loose ends on the exclusivity on the filter side of things on vehicle with the manufacturer. This is now done, so am happy to reveal who I am working with.. https://iconlifesaver.com/ I suggest reading up about their filters to understand why they were the only party that I would work with. They don’t produce ‘taste good’ filters, they remove all sorts of nasties. The UK and US military use them and have been lab tested with simulated sewerage for 10 days. This allows refill from stream/well etc whilst on your travels.
I will put a few images up to show the prototype, things are set to change with placement of parts, but it will give you an idea of what to expect.
I am happy to report that there is no change to the handling of the vehicle with respect to ESP/ABS intervention when fitted with a ‘full tank’. The tank is not in its final finish, but may well stay unpainted as it is 316 stainless and will have a brushed finish.

 

[Logsplitter]

Sorry for the delay, I missed this response. I have been covering more mileage ahead of getting the finalised version together along with tying up loose ends on the exclusivity on the filter side of things on vehicle with the manufacturer. This is now done, so am happy to reveal who I am working with.. https://iconlifesaver.com/ I suggest reading up about their filters to understand why they were the only party that I would work with. They don’t produce ‘taste good’ filters, they remove all sorts of nasties. The UK and US military use them and have been lab tested with simulated sewerage for 10 days. This allows refill from stream/well etc whilst on your travels.
I will put a few images up to show the prototype, things are set to change with placement of parts, but it will give you an idea of what to expect.
I am happy to report that there is no change to the handling of the vehicle with respect to ESP/ABS intervention when fitted with a ‘full tank’. The tank is not in its final finish, but may well stay unpainted as it is 316 stainless and will have a brushed finish.

I’m interested in what you are doing and keen to see what the finished product looks like. I’m going to be away until early November but keen to catch up on my return to see what your product looks like in the flesh. Are you making combined sill tank/rock sliders for both sides?

 

[ICI Fuselier]

It will be a handed system i.e left and right hand side. Trying to post an image…easier said than done apparently..

 

[ICI Fuselier]

Try this one!

 

[ICI Fuselier]

Hi Logsplitter, why the sad face? This is a prototype, feedback welcome!

 

[Logsplitter]

Hi Logsplitter, why the sad face? This is a prototype, feedback welcome!

The sad face was because there was no picture with the post. It has now appeared and looking good

 

[ICI Fuselier]

There will be a cover and the pressure release valve will be triangulated into the side. Will look a lot better than currently.