Light bar wiring to battery

[samm88]

Hello, I have a based Grenadier w/o high load auxiliary switch. I want to install a light bar but I do not know where to run the wiring from the roof to the battery. Does anyone what location where I could run the wiring? Ty

 

[TheDocAUS]

Ask @Telemark who has the same challenge (then let us know what you did):

T

Thread 'Aux Lightbar without the High-Load Panel'

Tuesday at 1:41 AM

I’m looking for someone to sanity-check my wiring plan.

My Quartermaster does NOT have the high-load auxiliary switch panel. I installed the Ineos cross-bar light bar (given to me), which needs a 25-amp circuit. My idea is to use Aux Switch 1 (rated for 10 amps) only to trigger a 30-amp relay, and then run a dedicated power feed to the relay with a 25-amp fuse for the actual light bar power. Does this wiring approach make sense? Not sure how I run the power to the rack yet, that I will figure out later. Appreciate any thoughts on this!

• Telemark
• aux aux lights lightbar lights panel wiring
• Replies: 4
• Forum: Grenadier Quartermaster Pickup

• 

 

[rob88]

There's a grommet behind the passenger side kick panel. Pull the plastic trim off in the footwell and you'll see it. Run your wires through there into the engine bay and over to the battery. It's the cleanest way.