wiring

I did not get my truck delivered with the tow pack installed which is unfortunate but was able to get the received from the dealer. I would like to add a simple 7pin/4pin combo unit to the blank hole under the bumper but need help with the wiring. I was planning on using a powered or...

Exhausted searching for this, so if I missed it let me know. USA 2023/24 spec has a 7 pin round trailer electrics connector. Pin 2 should be a lead that is wired for trailer brakes, but given there is no brake controller fitted stock I am wondering if this lead is wired in the socket, and if so...

Does anyone have a diagram on what switches control what extra wires? interior front foot wells on driver and passenger sides (assuming these are INT 1 and INT 2) two spots in the engine compartment (thinking EXT 1 and EXT 5) Obviously the 500a is for the winch/nato plug (EXT 4) That would...

Just finished installing and testing a trailer brake controller on our NA Grenadier. Went with the Redarc EBRH-ACCV3-NA Tow-Pro Elite Electric Brake Controller; as suggested by Mark @ Redarc. This is the same unit we had on our Defender. I also needed to order a longer remote wire to move...

Hi! I am wondering if the space under the grill area is a functional vent for cooling? I wanted to place a light bar here because it fits perfectly. Also, where is the plug located for Ext1 so I can connect it to the interior switch? These are my two options at the moment.

FYI https://static.nhtsa.gov/odi/rcl/2023/RCAK-23V828-8554.pdf Ineos Automotive Americas, LLC (Ineos) is recalling certain 2024 Grenadier vehicles equipped with the auxiliary switch package relay. The relay control wire may have been trapped under the relay power cable connection fastener...

@FlyingTexan @Lord Ripon USA Strange but I'm pretty certain I checked the "hitch" option but when it arrived at the dealer there was no hitch. All our trucks have hitches, what I thought was my order summary has the hitch checked off. Dealer says it can be added for $1000 (800 parts and 200...

I need to know how i connect the ctek to the wires in the box under the seat. Any one has the diagram or know how?

Thought I'd post my UHF installation. Not as detailed as some other forum members, but hopefully clear enough to see the approach. Not having a bullbar yet (don't like the IG offering), I decided to mount the Antenna on the Passenger side rear utility rail. I also wanted concealed wiring and no...

Any ideas how to remove this piece under the plastic floor trim. Removal of bolts yields little movement or release in any obvious way. I want to run some wiring inside through to the rear (UHF Antenna cable). Maybe I'm missing something, maybe there's a better way? Any help is appreciated. Cam

Can anyone provide the location of the firewall access adding accessory wiring/antenna cable for radio installation? Thanks RJ Denver, Colorado

In models ordered without the winch, is the wiring harness for the winch installed at build if you ask for the high load circuitry? Do Grenadiers with winches get entirely different wiring harnesses? or is is an easily added dealer option? (which implies the vehicle prewired for the winch) I...

UNILUG One thing I hope to do is upgrade the battery terminals on the auxiliary battery using the Unilug. Full technical specifications for the Unilug here. The product guide will answer most of your questions aiout the Unilug. Warning: the clearance on two seater models is less, so greater...

Apologies in advance if this has already been posted, and if so, please direct me to the original post. Where do the wiring tails for the Interior switches No’s 1 & 2 terminate? I have the auxiliary wiring and switches as well, which are self explanatory, but the 12v sockets in both the...

So I was expecting to see something like this as standard: But I appear to be missing any terminals in 13, 5 & 6. Additionally, my permanent live is in position 7.

Today I tested electrically the right side footwell auxiliary potential power point, and indeed: 12V, with PWR on and INT2 on on the "aviation" roof switch panel. Some pictures: Then I removed the tape around the wire, did cut the top of the transparent plastic protection hose of the wire...