The Grenadier Forum

A community driving the extraordinary.

Welcome to Global Grenadiers — the worldwide community for INEOS Grenadier and Quartermaster owners and enthusiasts. Register free to join the conversation. Share your build and adventures, access technical guides, join your regional social group, get help on the trail, and receive our monthly newsletter.

INEOS Agents, Dealers or Commercial vendors — please use the Contact us link at the bottom of the page.

for those wondering how to connect to DTP connectors on roof

reidanerg

Grenadier Owner
Local time
8:09 AM
Joined
Apr 21, 2026
Messages
8
Location
los ángeles
so I went through a lot of trial and error, so hopefully this makes life easier for everyone else. To connect a light bar to the roof AUX DTP connectors, all you need is the contacts for the male plug thats provided. (I thought it was a dummy plug but it isnt, it's functional and just needs the contacts installed)🤦‍♂️ It seems super obvious to me now, but I didnt find any info while searching.
link to what you need is here :
 
Lots of DTP info here:


Lots of other useful links here:


and Part 2 here:

 
Last edited:
Lots of DTP info here:


Lots of other useful links here:


and Part 2 here:

I really am horrible using a computer. these links are amazing, thank you for providing!
 
Bad design that there is no roof rack power on the passenger front side - they should have run a four pin dtp there so you could plug in a scene light and/or a led bar…
 
couldn't you add a 2 way splitter?
Yes absolutely - but it takes up a lot of space - you're now trying to squeeze 3 plug/socket pairs into a space where only 1 is required if the design was sensible. A 4-pin female would support both the roofrack scene light power AND the roof bar power simultaneously.
 
Back
Top Bottom