Workshop Manuals available?

[FlyersFan76]

Of course there is only one. How typical of Ineos Automotive.

It is highly unlikely that the nut in questions is specific to the Grenadier axle. It is almost certainly used elsewhere. Given this there is definitely a tool available to fit. The issue is finding it. Why must Ineos make everything so difficult.........

AM General did the same thing. They used a Penta nut on the bead locks.

I know Kent Moore Tool made those sockets.

 

[Logsplitter]

Here’s the torque wrench used to torque up my hub nuts to 600Nm. It’s what the dealer uses on Fendt tractors ! No picture of the actual hub nut socket I’m afraid. It must be a trade secret

 

[Tom109]

Here’s the torque wrench used to torque up my hub nuts to 600Nm. It’s what the dealer uses on Fendt tractors ! No picture of the actual hub nut socket I’m afraid. It must be a trade secret View attachment 7907934

Yeah, that’s probably $2k easy for that wrench. The socket is huge too.

 

[Logsplitter]

Yeah, that’s probably $2k easy for that wrench. The socket is huge too.

Im going to get a cheap socket online with a digital torque converter and a scaffold bar

 

[parb]

I'm eagerly awaiting my access... Got some things I want to look up. Specifically the wires to the pin in the head lights. Want to add a relay to the full beam and want to confirm the wire color for the high beam wire to the headlight.

 

[Logsplitter]

I'm eagerly awaiting my access... Got some things I want to look up. Specifically the wires to the pin in the head lights. Want to add a relay to the full beam and want to confirm the wire color for the high beam wire to the headlight.

You’ll be lucky if you can find anything detailed on the wiring.

 

[Jeremy996]

I'm eagerly awaiting my access... Got some things I want to look up. Specifically the wires to the pin in the head lights. Want to add a relay to the full beam and want to confirm the wire color for the high beam wire to the headlight.

https://www.theineosforum.com/resources/grenadier-electrical-system-schematics.84/ Page 44 -6 (but I could not decode the colours).

 

[SMarshall]

Bingo. Here we are
View attachment 7907685

If someone can get the width and depth and height of the "teeth" this isn't a hard part to machine...