What did you do with your Grenadier today?

[CRH]

Had intended to make my own rear door cargo retainers but in the end gave in to laziness and bought the Kaon ones.
And bought a remote for the Elecbrakes bluetooth trailer brake unit.
View attachment 7917177
View attachment 7917178

Laziness is the best

 

[Tazzieman]

Laziness is the best

Well when time is at a premium, yes

 

[jscherb]

About two months ago I installed overhead MOLLE panels with L-Tracks in the cargo compartment above the side windows. I've been using mostly ordinary MOLLE pouches on the panels and they've proven to be very useful extra storage and the panels performed well on our off-road trip out west to Death Valley and Moab. I didn't have optimal size MOLLE pouches for this location so I sewed a few which should be more useful than the pouches I was using and I think they're better looking. I've done two sizes so far to see which size is most useful.

My build thread: https://tinyurl.com/265dxjyc

New content every day: Land Rover Ideas for Grenadiers: https://tinyurl.com/3puyt6m3

 

[Tylerb42]

Got the Leitner 3/4 rack and their Starlink mini mount on. Amazing quality.

Casually looking for a flooring panel to cover the gap caused by the Starlink being recessed between two load bars at fixed width. FYI if anyone does the same, it will need mounting points at 14 or 16” OC wide. roughly 40” long.

 

[HeavyFoot]

Got the Leitner 3/4 rack and their Starlink mini mount on. Amazing quality.

Casually looking for a flooring panel to cover the gap caused by the Starlink being recessed between two load bars at fixed width. FYI if anyone does the same, it will need mounting points at 14 or 16” OC wide. roughly 40” long.

Which side lights are those on your grab handles?

 

[Tylerb42]

Which side lights are those on your grab handles?

Stedi micro touch dual color.

Dimmable white and yellow light. Have to order from Stedi UK, not USA.

Stedi UK micro

 

[HeavyFoot]

Stedi micro touch dual color.

Dimmable white and yellow light. Have to order from Stedi UK, not USA.

Stedi UK micro

Are you happy with them? And where did that mount come from?

 

[ScotsmanSD]

Are you happy with them? And where did that mount come from?

I have the same lights, mounted on the Leitner rack. Like the dual color option & dimming function.

 

[HeavyFoot]

I have the same lights, mounted on the Leitner rack. Like the dual color option & dimming function.

Thank you! The pictures perfectly satisfied my curiosity as well. I’ll go this route.

 

[Tylerb42]

Are you happy with them? And where did that mount come from?

They are great. Like Scotsman said, the dual color and dimming are great options to have.

Link to mounts

FYI shipping is a little high from Stedi UK, order them all at once and will be cheaper. There will be duties due to DHL once they hit the states. I think they ended up being ~$120-130 all in after everything

 

[.Jeff]

Stedi micro touch dual color.

Dimmable white and yellow light. Have to order from Stedi UK, not USA.

Stedi UK micro

These are fantastic-looking. Thanks for sharing. I think I will order, but shoot the mount bolts & washers with a bit of black paint. These almost look like OEM parts.

 

[Emil]

I have the two-tone from ABNTR4x4 as a plug&play set with mounts, Deutsch plugs and wiring. https://shop.abenteuer4x4.com/stedi...plug-play-seitenlicht-set-ineos-1-323-lm.html For camping, warm white only might do: https://shop.abenteuer4x4.com/stedi...lay-lichtleisten-set-fuer-ineos-1-400-lm.html On the pictures, there is cold white on the left and warm white on the right.

 

[Tylerb42]

These are fantastic-looking. Thanks for sharing. I think I will order, but shoot the mount bolts & washers with a bit of black paint. These almost look like OEM parts.

all black would look great. I hit the plastic orange accents with satin black paint, may eventually do the same with mounting hardware.

They are fitted with DTP connectors, so you’ll need to splice in a DT connector to mate with the roof outlets.

I eventually got smart and just clipped the light wire and replaced with a male DT so I didn’t have multiple DTP/DT connectors in the same run.

 

[Tylerb42]

I have the two-tone from ABNTR4x4 as a plug&play set with mounts, Deutsch plugs and wiring. https://shop.abenteuer4x4.com/stedi...plug-play-seitenlicht-set-ineos-1-323-lm.html For camping, warm white only might do: https://shop.abenteuer4x4.com/stedi...lay-lichtleisten-set-fuer-ineos-1-400-lm.html On the pictures, there is cold white on the left and warm white on the right.

Those mounts look great. Thinner than I could find and I like the in/out adjustability.

 

[HeavyFoot]

I have the two-tone from ABNTR4x4 as a plug&play set with mounts, Deutsch plugs and wiring. https://shop.abenteuer4x4.com/stedi...plug-play-seitenlicht-set-ineos-1-323-lm.html For camping, warm white only might do: https://shop.abenteuer4x4.com/stedi...lay-lichtleisten-set-fuer-ineos-1-400-lm.html On the pictures, there is cold white on the left and warm white on the right.

Will these fit around the grab handle with the electric connection? Or must they go on the empty handle?