Removable draw system

[DCPU]

I'm pretty sure an early Grenadier was modelled in cardboard...the photos out there somewhere.

 

[DenisM]

Another option besides Gearmate, and a "sleeper" to boot:

View attachment 7807956View attachment 7807957View attachment 7807958View attachment 7807959
View attachment 7807964

Four wheels car and campervans camping box - RaidBox 2.0 - CapVanGo - Fréjus - Var

The Raid Box is a removable fitting for 4x4 : Land Rover Defender, Toyota Land cruiser and Ineos Grenadier.

capvango.com

That's got the makings of a viable alternative to towing a camper trailer. I'm not sure however how they'd accommodate a 195cm length bed into the Gren. ...unless the front seats were moved to the forward extremity. Then there's the issue of no cargo barrier...
The recent "near death" head-on collision experience of @TheDocAUS has yet again reinforced my belief in the absolute necessity for a certified cargo barrier when one has literally a hundred plus Kg of potential missiles lined up behind one's head in the form of a "fit-out" with minimal restraint in the event of the "unthinkable".... The Raidbox is a very attractive product... It should have a cargo barrier as standard inclusion....

 

[DCPU]

Superkarpata fit out:

 

[bmore_burnsy]

For those considering the LeTech two-drawer system, I've just confirmed with the company that each drawer has a weight limit of 35kg (~77lbs). I'm waiting to hear about shipping options/costs to the US.

(https://lennartz-technik.de/fileadm...pekt_LeTech_Zubehoer_fuer_Ineos_Grenadier.pdf)

 

[jb_hamon]

Here is my drawer project for my 2 seater Grenadier.
It’s 100cm deep at the base and 159 deep at the top, 105cm wide and 85cm high.
This is the main element of a tailor-made system which will also comprise some storing compartments over the wheel arches and in one of the two empty volumes near the rear side panels. I’m reserving the second one for a gull wing when there will be one aftermarket solution available.
The 20cm remaining between the top of the system and Grenadier’s roof will be used to store some chairs, tables, mosquito nets and walls for the James Baroud awning…

 

[Krabby]

Here is my drawer project for my 2 seater Grenadier.
It’s 100cm deep at the base and 159 deep at the top, 105cm wide and 85cm high.
This is the main element of a tailor-made system which will also comprise some storing compartments over the wheel arches and in one of the two empty volumes near the rear side panels. I’m reserving the second one for a gull wing when there will be one aftermarket solution available.
The 20cm remaining between the top of the system and Grenadier’s roof will be used to store some chairs, tables, mosquito nets and walls for the James Baroud awning…

Wow.

 

[Miki]

Here is my drawer project for my 2 seater Grenadier.
<snip>

That is very impressive JB.
What is it made out of ?

 

[ADVAW8S]

What are you guys using to draw up your drawer system? I haven't used cad since high school. I am not an architect so any free or easy to use systems would be great.

 

[anand]

Superkarpata fit out:View attachment 7813505

Ahh yes, nothing my passengers love more than receiving a tablet to the chest if the airbag deploys....

 

[jb_hamon]

That is very impressive JB.
What is it made out of ?

Probably 10mm plywood, and a raptor black finish.

 

[jb_hamon]

What are you guys using to draw up your drawer system? I haven't used cad since high school. I am not an architect so any free or easy to use systems would be great.

Shapr3D on iPad. The free version lets you create two different projects only, and you can’t apply any textures.

 

[Miki]

Probably 10mm plywood, and a raptor black finish.

How many square meters are there in total ? ... 10mm ply is approx 4.5kgs/M2.

 

[jb_hamon]

Awesome- what version do you have? I didn’t think 100cm deep and vertical to the roof in the front would fit in a station wagon??

I have the 2 seater.

 

[jb_hamon]

Dimensions…

 

[jb_hamon]

How many square meters are there in total ? ... 10mm ply is approx 4.5kgs/M2.

I’d say approximately 10m2. But some cut out will be done where possible to reduce the weight.

 

[Miki]

This is a good alternative to ply and IMO would be a lot better.
Easy to cut, can be welded or glued, easy to clean, lighter, no need to paint etc.

An American site but is available in the EU.

https://www.tapplastics.com/plastics/custom-cut-to-size-plastic-sheets/hdpe-sheets

https://www.tapplastics.com/product/plastics/cut_to_size_plastic/king-starboard-st

 

[DCPU]

Ahh yes, nothing my passengers love more than receiving a tablet to the chest if the airbag deploys....

Would you not indulge them and instead switch off the passenger airbag?

 

[ADVAW8S]

This is a good alternative to ply and IMO would be a lot better.
Easy to cut, can be welded or glued, easy to clean, lighter, no need to paint etc.

An American site but is available in the EU.

https://www.tapplastics.com/plastics/custom-cut-to-size-plastic-sheets/hdpe-sheets

https://www.tapplastics.com/product/plastics/cut_to_size_plastic/king-starboard-st

I have a Tap near my house and I was going to talk them about the drawer system. Thanks for helping confirm my idea

 

[jb_hamon]

This is a good alternative to ply and IMO would be a lot better.
Easy to cut, can be welded or glued, easy to clean, lighter, no need to paint etc.

An American site but is available in the EU.

https://www.tapplastics.com/plastics/custom-cut-to-size-plastic-sheets/hdpe-sheets

https://www.tapplastics.com/product/plastics/cut_to_size_plastic/king-starboard-st

I’ll have a look but I’m not that much into plastic. Neither the craftsman who is going to make it…

 

[jb_hamon]

This is a good alternative to ply and IMO would be a lot better.
Easy to cut, can be welded or glued, easy to clean, lighter, no need to paint etc.

An American site but is available in the EU.

https://www.tapplastics.com/plastics/custom-cut-to-size-plastic-sheets/hdpe-sheets

https://www.tapplastics.com/product/plastics/cut_to_size_plastic/king-starboard-st

Anyway, do you have a web link in Europe ? Nothing showed up immediately on google…