Build Thread ItsDchz Build Thread - Eldoret Blue Trialmaster CenCal - Blue Rhino

[Itsdchz]

Roof lights for fog and chase

 

[Itsdchz]

Changed out the Auxbeam 360 with amber covers, to the side shot 7” with built in DRL.
And added Bison Gear rear side panel molle, with storage space.

 

[Itsdchz]

Latech style ladder, courtesy of Marty from Offroad gear guys, inbound and will be shown installed this weekend, with my Jerry can bar on the go……

 

[Krabby]

Would love one of those!

 

[Itsdchz]

 

[Krabby]

Looks great.

Question - what’s the badge above your club one?

 

[Itsdchz]

Looks great.

Question - what’s the badge above your club one?

Overland bound
Member 6666

Overland Bound - Off-Road Mapping and Trip Planning

Overland Bound is the only off-road trip planning and mapping solution with community support built in for your overland, vanlife or car camping trips.

www.overlandbound.com

 

[dcoy]

Overland bound
Member 6666

It's good there are four instead of three digits to the Member #.

 

[Itsdchz]

Added some of the rubber mounts that Marty from Offroad Gear Guys provided with the ladder. Can us snug and flat. Glad there are multiple mount points for the rubber stops, to allow for different size cans or rotopax.

 

[Itsdchz]

Oil Change, as my 5000 mile obsession.

Replaced the rear brakes as my brake indicator started going on intermittently, then immediately.
Very easy and thanks to Justin aka @Bodhi’s Grenadier for the helpful video.

While down there I added the @Metalcloak bumpstops and rear muffler brace, which obviously would’ve helped with my mangled rear skid courtesy of Panamint run with John from Agile Offroad. Replaced the mangled Rival with a new one, painted in my obsession with safety orange. Yes, I know there are other options available, but it did its job already, and they were helpful in a replacement purchase.

 

[dcoy]

Front Fender Damage. Could not find any explanation in your Build Thread for this but wondering if it had something to do with the Owl Bolt On Bull Bar. Thanks.

 

[Roadking01]

Bumper [nearly] completed
View attachment 7904553View attachment 7904554View attachment 7904555View attachment 7904556View attachment 7904557View attachment 7904558View attachment 7904559View attachment 7904560View attachment 7904561View attachment 7904562View attachment 7904563View attachment 7904564View attachment 7904565View attachment 7904566

That is the brush bar I think looks great. Just got a Trialmaster. Difficult install and pleased with the bar?

 

[Itsdchz]

That is the brush bar I think looks great. Just got a Trialmaster. Difficult install and pleased with the bar?

Was fairly simple
Did it alone with a floor jack

 

[Itsdchz]

Front Fender Damage. Could not find any explanation in your Build Thread for this but wondering if it had something to do with the Owl Bolt On Bull Bar. Thanks.

Yes
Owl and any bolt on Bull bar = accident multiplier
Phantom braking of Tesla in self drive
Tapped back of Tesla
Corner of bumper
The flex of the bull bar on dash cam video was amazing - not in a good way

 

[dcoy]

Yes
Owl and any bolt on Bull bar = accident multiplier
Phantom braking of Tesla in self drive
Tapped back of Tesla
Corner of bumper
The flex of the bull bar on dash cam video was amazing - not in a good way

Thanks. As more legitimate bumpers are offered for the Grenadier, hopefully the bolt on Bull Bars will be less of a temptation. Also, they provide the best way of mounting a winch, in the non "hidden" way, IMO.

By the way, I appreciate your fleet in the driveway, especially that 80 series with what I assume is a Campteq.

 

[Ovrland Bill]

Oil Change, as my 5000 mile obsession.

Replaced the rear brakes as my brake indicator started going on intermittently, then immediately.
Very easy and thanks to Justin aka @Bodhi’s Grenadier for the helpful video.

While down there I added the @Metalcloak bumpstops and rear muffler brace, which obviously would’ve helped with my mangled rear skid courtesy of Panamint run with John from Agile Offroad. Replaced the mangled Rival with a new one, painted in my obsession with safety orange. Yes, I know there are other options available, but it did its job already, and they were helpful in a replacement purchase.
View attachment 7924901View attachment 7924902View attachment 7924903View attachment 7924904View attachment 7924905
View attachment 7924906View attachment 7924907View attachment 7924908View attachment 7924909View attachment 7924910View attachment 7924911View attachment 7924912View attachment 7924913View attachment 7924914View attachment 7924915View attachment 7924916View attachment 7924917View attachment 7924918View attachment 7924919View attachment 7924920View attachment 7924921View attachment 7924922View attachment 7924923View attachment 7924925View attachment 7924926View attachment 7924927View attachment 7924928View attachment 7924929View attachment 7924930View attachment 7924931View attachment 7924932View attachment 7924933View attachment 7924934View attachment 7924935

Now, thanks to your photos and info, I too have a Metalcloak reinforcement under the muffler skid plate.