Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.
Mine are very similar units, just a bit more rounded. Have not had any issues with knees, as they don't protrude much at all. I had them professionally installed since there is a 100% chance of me screwing up the electrical system.There are lots of examples on here. This is just one. Use the search function at top right and comb through the threads. Many have put them in the driver’s right knee area as well (LHD).One of the misses on the Gren for me is the lack of USB ports on the center stack. I had seen lots of units let into the panel either side of the stack but think they may be a little vulnerable to knees etc. I decided to take a look at the tray in front of the shifter and this is the result. I bought the units from Amazon. I put this up on Facebook and was asked to detail the process, so here we go.
1. Remove the rubber mat from the tray, it just pops up
2. Remove 16 Allen head bolts from the 3 covers on the center console.
3. Remove the three covers, they are held by clips, the one on...
- Wyobrit
- Replies: 3
- Forum: Electrical, ECU, HVAC, Lights & Infotainment