Grab Handle Bolt size differences?

[5teve]

Hi Guys

Car is currently getting ceramic coating - and i'm just questioning Rola regarding their 'ridge mount' instructions and actual bolt slot size Instructions Say T60 but its T30 and the slots are cut to suit M8 and not the M6 mine has fitted - making the brackets a pretty loose fit and needing winding up hard to hold (with not much contact under the bolt head) the rack bols into the top row of bolts holding the grab handles on.

Rola are saying the developement vehicle had T60 - so I'm wondering if this has varied over time as mine is a late 2025 version.

Thanks

Steve

 

[Clark Kent]

Hi Guys

Car is currently getting ceramic coating - and i'm just questioning Rola regarding their 'ridge mount' instructions and actual bolt slot size Instructions Say T60 but its T30 and the slots are cut to suit M8 and not the M6 mine has fitted - making the brackets a pretty loose fit and needing winding up hard to hold (with not much contact under the bolt head) the rack bols into the top row of bolts holding the grab handles on.

Rola are saying the developement vehicle had T60 - so I'm wondering if this has varied over time as mine is a late 2025 version.

Thanks

Steve

Can confirm my early MY23 with VIN x1886 has 6mm screws with a T30 Torx head. I guess it's possible that Rola saw M8 screws on a PTO pre-production vehicle but surely they would have checked against a production vehicle before starting fabrication?

Anyways, here's the equivalent info from the Leitner rack I have fitted.
This also confirms T30 wrench and 6mm screws.

 

[5teve]

Can confirm my early MY23 with VIN x1886 has 6mm screws with a T30 Torx head. I guess it's possible that Rola saw M8 screws on a PTO pre-production vehicle but surely they would have checked against a production vehicle before starting fabrication?

Anyways, here's the equivalent info from the Leitner rack I have fitted.
This also confirms T30 wrench and 6mm screws.

View attachment 7926593

View attachment 7926591

Thanks for that - I'll pass it on to rola...