DIY - Rear Drawer system build - $150 - One sheet of plywood - 1"X8" 12 foot and 1"X6" 12 foot.

[hightechcoonass]

I built this today.
41" wide X 32" deep (sides and back are 1" x 8" pine boards.)
Drawers built with 1" X 6 " pine boards and plywood drop off 16" X 19" (bottom)
(Carpet was left over from my 4Runner drawer build, and oak drawer fronts we re-purposed from my 4Runner drawers )

linky to the pic

 

[chrsbe]

.... the image is not loading

 

[Voader - Oudersopzwier]

I built this today.
41" wide X 32" deep (sides and back are 1" x 8" pine boards.)
Drawers built with 1" X 6 " pine boards and plywood drop off 16" X 19" (bottom)
(Carpet was left over from my 4Runner drawer build, and oak drawer fronts we re-purposed from my 4Runner drawers )

linky to the pic

Nice done.