the place to upload your MOAB images for the community
The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

CTEK CT5

So, could you also fit a solar panel with MPPT to the EXT3 roof connector, flip on both overhead power & EXT3, and charge the batteries in the same manner?
Logically I think it should work but only if you have an MPPT between the panel and the socket. Needs testing as it would be a lot easier than adding the D250SE just to get a solar input.
 
Logically I think it should work but only if you have an MPPT between the panel and the socket. Needs testing as it would be a lot easier than adding the D250SE just to get a solar input.
I have this on my list. I’ll start to search for a solar panel with a built in weatherproof MPPT, or a weatherproof MPPT I can mount below the panel.
 
I used to have a BMW 5-Series and my commute to work was very short, less than a mile. The battery didn't like that. I used this Battery Tender OBDII adapter to a solar panel on the dashboard to keep the battery levels up.

I'll be on a extended business trip later this year and was thinking of pulling this our again should I need to keep my Grenadier battery topped up.

Battery Tender OBDII Adapter Cable for 12V Battery Charging

Battery Tender 5 Watt Solar Panel 12V Battery Charger with Charge Controller

Might help someone looking for a simple plug and play solution and without access to 120V for a maintainer.
 
I posted this elsewhere but I had this kit installed by RDS, they located the hookup in the black plastic headlamp bezel on the driver side. Sorry no photos can post some when I get my truck back again in a few weeks. They ran the wiring to the battery as they'd had problems with vehicles that they had charged via jump points under hood. This will work with any CTEK charger and provides a quick magnet hookup.

 
Back
Top Bottom