Bison Gear Ineos

[Highwayman]

I’m quite interested in the ceiling shelf thing so that I can still put stuff (jackets etc) in the boot without mucky dogs getting them mucky too.

How does the shelf fit with the factory cargo barrier in a station wagon?

View attachment 7898151

I have fittef the Bison Gear shelf with the cargo barrier and it works well. I had to drill an additional hole in the shelf as it now sits about 20mm further back. Very easy adaptation

 

[Grey Wolf]

I’m quite interested in the ceiling shelf thing so that I can still put stuff (jackets etc) in the boot without mucky dogs getting them mucky too.

How does the shelf fit with the factory cargo barrier in a station wagon?

View attachment 7898151

I removed the factory barrier and purchased the fold down barrier with the shelf from Bison. It seems perfect with no rattles and it's easy to folder up out of the way.

 

[Baron von Teuchter]

I have fittef the Bison Gear shelf with the cargo barrier and it works well. I had to drill an additional hole in the shelf as it now sits about 20mm further back. Very easy adaptation

Excellent, that’s really helpful, thanks a lot!

 

[Baron von Teuchter]

I removed the factory barrier and purchased the fold down barrier with the shelf from Bison. It seems perfect with no rattles and it's easy to folder up out of the way.

Hmmm thanks I did wonder about that - at the moment the cargo barrier blocks access to the pockets in the back of the tougher seat covers - like yours I guess. How does it attach to the top of the seat backs? Looks like a bar against the headrest rods?

 

[Grey Wolf]

Hmmm thanks I did wonder about that - at the moment the cargo barrier blocks access to the pockets in the back of the tougher seat covers - like yours I guess. How does it attach to the top of the seat backs? Looks like a bar against the headrest rods?

Bison supply a couple of brackets that thread on to the head rests and then a threaded knob holds the foldable cargo barrier in place . When folded up it's held by magnets.

 

[Tenac]

Hello,
There were few with wrong mounting bolts (M8 instead of M6). Please contact Bison Gear, provide your address or order ID and we will ship you correct bolts ASAP.

I connected with customer service, they are asking for pictures now.... lol I'll send them all the data but if this is a known issue it be nice to have this resolved without me needing to take pictures of bolts...

 

[parb]

Anyone know the thread of the knurled bolts for the barrier? I misplaced mine.

 

[Vilhelm007]

- drawers (similar to one we have for 4Runner),
- interior panels,
- folding cargo barrier (similar to one we have for other cars - PATENTED)
- door table similar to one we have for Defender (one with MOLLE panel on front, stainless steel top and wooden slide out)
- additional sub shelf to keep FR chairs under the shelf (or other flat items), [no it doesn't rattle]
And much more (basically full product range we have in offer for other trucks check our Instagram @bisongear).

What other products would you like to see from us? Your suggestions play a crucial role in shaping our future offerings, so feel free to share your ideas with us. We appreciate your interest and support!

View attachment 7840354View attachment 7840355
View attachment 7840356View attachment 7840357

How about a real snorkel instead of a raised air intake that I do not see a need for in NH! Or a way to seal the raised air intake to tun it into a snorkel and a raised air filter! A multi-functional air intake/snorkel !!That sounds like simple common sense to me! Can we all contact the Grenadier people to make this happen please!

 

[GM]

This is a long shot but, any chance you guys might be able to offer an alternative mounting option for your external molle panels? I’m awaiting delivery of a Benchmark roof rack which, unfortunately, won’t allow use of your current brackets.

Figured it doesn’t hurt to ask.

 

[Baron von Teuchter]

How about a real snorkel instead of a raised air intake that I do not see a need for in NH! Or a way to seal the raised air intake to tun it into a snorkel and a raised air filter! A multi-functional air intake/snorkel !!That sounds like simple common sense to me! Can we all contact the Grenadier people to make this happen please!

I would imagine an aftermarket one will be along soon.

But yeah I agree it’s an odd choice to make it “just” a raised air intake and not seal it

 

[AngusMacG]

How about a real snorkel instead of a raised air intake that I do not see a need for in NH! Or a way to seal the raised air intake to tun it into a snorkel and a raised air filter! A multi-functional air intake/snorkel !!That sounds like simple common sense to me! Can we all contact the Grenadier people to make this happen please!

This is what I want. Grenny snorkel

 

[pipo]

- drawers (similar to one we have for 4Runner),
- interior panels,
- folding cargo barrier (similar to one we have for other cars - PATENTED)
- door table similar to one we have for Defender (one with MOLLE panel on front, stainless steel top and wooden slide out)
- additional sub shelf to keep FR chairs under the shelf (or other flat items), [no it doesn't rattle]
And much more (basically full product range we have in offer for other trucks check our Instagram @bisongear).

What other products would you like to see from us? Your suggestions play a crucial role in shaping our future offerings, so feel free to share your ideas with us. We appreciate your interest and support!

View attachment 7840354View attachment 7840355
View attachment 7840356View attachment 7840357

One of the first products I had expected to be provided by the aftermarket after seeing the first Grenny pre release but that never materialised (as far as I am aware):

a quick release and re-attach mechanism for the lower parts of the rear seats in order to take them out (instead of folding up) without using a screwdriver (and fear of damaging the plastic rings over time).

Admittedly an edge case for everyone planning a sleeping setup inside the Gren and in search of a certain length inside the car.

 

[ECrider]

I’m quite interested in the ceiling shelf thing so that I can still put stuff (jackets etc) in the boot without mucky dogs getting them mucky too.

How does the shelf fit with the factory cargo barrier in a station wagon?

View attachment 7898151

I have the half height OEM cargo barrier and Bison shelf in my N1 and it fits well. Think I used a few penny washers instead of the spacer provided on one of the upper attachment holes. Very happy with this combo.