The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.

Under dash UHF radio install

Whenever I need something bent (folded) (3 or 4 mm aluminum, 3 mm stainless, or 4, 6, or 10 mm mild steel), I always go to my local metalworking shop. They have the material I need, and they have a 200-ton press brake with which they can bend or fold the workpieces according to my specifications.
I would do the same if a workshop was nearby. Most of my working life I have to improvise, as we are tide dependent for access on and off with a boat. And my home is a village with no workshops for a few miles. I like DIY solutions when I can.
 
Back
Top Bottom