Red Winch - Integrated Front Winch - User Manual

[AnD3rew]

Yeah Nah. Just the reality of Australian Consumer Law.

Shhhh. We are special.

 

[ECrider]

I would like to make a bridle up for the front. Can anyone please advise the distance between the centres of the two front recovery eyes?

Presume same for rear? Just curious as will look to use central recovery eye in the receiver there.

 

[DCPU]

I would like to make a bridle up for the front. Can anyone please advise the distance between the centres of the two front recovery eyes?

Presume same for rear? Just curious as will look to use central recovery eye in the receiver there.

Rear - measured centre to centre - 112cm:


Front - measured centre to centre - just over 78cm:

 

[ECrider]

Rear - measured centre to centre - 112cm:
View attachment 7812875View attachment 7812876

Front - measured centre to centre - just over 78cm:

View attachment 7812877

Thank you vm DCPU - a scholar and a gentleman.

 

[AnD3rew]

I would like to make a bridle up for the front. Can anyone please advise the distance between the centres of the two front recovery eyes?

Presume same for rear? Just curious as will look to use central recovery eye in the receiver there.

5m is a good length for most vehicles

 

[Tazzieman]

5m is a good length for most vehicles

For the front. I think 7m for the back points to maintain 20 degrees, if one is that precise!

 

[Michael H.]

For the front. I think 7m for the back points to maintain 20 degrees, if one is that precise!

Am I right that a 5m equaliser on the rear would still give an angle less than 30 degrees which would be OK?

 

[DCPU]

So who's doing the sums - how far off front/rear bumper does that take each length?

 

[Arkaig]

Am I right that a 5m equaliser on the rear would still give an angle less than 30 degrees which would be OK?

Yes

 

[Arkaig]

For those with the plastic bumper, there's plenty of room to leave a snatch ring attached behind the number plate - I'm also using a padded bag.

 

[jeremy_matrix]

Which countries are getting plastic bumper vs steel bumper?

 

[Krabby]

I believe UK & EU are plastic while Oz and NA are metal. Not sure about ROW.

 

[jeremy_matrix]

I believe UK & EU are plastic while Oz and NA are metal. Not sure about ROW.

Interesting. Wonder why the UK and EU got plastic, but AUS and N. America got metal. Anyone know?

 

[globalgregors]

Interesting. Wonder why the UK and EU got plastic, but AUS and N. America got metal. Anyone know?

Pedestrian safety regs in the EU.

 

[jeremy_matrix]

Pedestrian safety regs in the EU.

NHTSA in the USA wouldn't approve of your post. They're the most pedestrian-friendly folk in the world they believe.

 

[Heater]

NHTSA in the USA wouldn't approve of your post. They're the most pedestrian-friendly folk in the world they believe.

Is it confirmed the US is getting steel bumpers? I have no insight.

Thanks.

 

[Krabby]

Is it confirmed the US is getting steel bumpers? I have no insight.

Thanks.

Fact.

 

[DCPU]

To winch owners ~ any of you got the official Winch Manual yet?

 

[Del]

To winch owners ~ any of you got the official Winch Manual yet?

Nope

 

[CountyV8]

got the unofficial one but Red say it has not signed it off