The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.

UK & Ireland Official recognition of issue with Handsfree Audio

Simon C

Grenadier Owner
Local time
9:38 AM
Joined
May 25, 2023
Messages
66
Location
Berkshire
Despite 2yrs of my handsfree being unusable there still doesn't seem to be any confirmation from Ineos that this is a known fault, especially when many others have complained about it.

I would like to request recognition that this is an issue and a plan for resolution
 
One part of the bad sound quality for the people on the other end of a phone call is, that the Background noise from engine, vibration, and so on travels directly through every hard parts and plastics. There ist no barrier between the mics and the Rest of the body. In addition, they are Set Back a little from the Opening in the panel and pointed straight down, Not at the driver.
A little improvement is to let the mics Hang Out of the roof panel. Background noise is noticeably less loud than before. A little bit Like rebalancing the Sound-Levels of an equilizer. Maybe not looking nice, but hey...
There is even a Bosch Car Service in Germany, selling Hand-Made, fitting adapter-cables to reposition the two mics. E.g. left and right of the rear View mirror.
Do they sell these adapter cables online. If they are available then I would give them a try.
 
  • Like
Reactions: CRH
Here are the Photos of the "new" positions of the mics. As I said: not pretty and no 100% fix, but noticeable improvement with reasonable effort. For 100% fix there would have to be some software noise-canceling, I think. That the mics are also used by the E-Call system, limits the options of tampering with them a bit.
The yellow marked spot would also be an option, but more visible and would need another, longer cable. Wich should not be a problem at all, since the adapter cables are made on demand with original pins and connectors and cables from 50m rolls.
 

Attachments

  • Mikro_Platzierungsvorschlag (2).jpg
    Mikro_Platzierungsvorschlag (2).jpg
    335.9 KB · Views: 9
  • Mikro_Platzierungsvorschlag (3).jpg
    Mikro_Platzierungsvorschlag (3).jpg
    443.3 KB · Views: 9
  • Mikro_Platzierungsvorschlag (1).jpg
    Mikro_Platzierungsvorschlag (1).jpg
    461.4 KB · Views: 9
  • Like
Reactions: CRH
Back
Top Bottom