Lost my rubber

[Ybviking]

New one for the collective: left hand, front side , where the roof gutter ends. Theres a rubber piece that wraps around towards the windshield.

It popped off whilst giving the buggy a good scrubbing. Appears there is a retaining pin/screw/ grommit has gone missing.

Can someone see what they have on their vehicle so I know what to try and replace?

 

[Ybviking]

Ko Ineos has kindly provided me a replacement screw. Apparently it is designed to be removed and cleaned on occasion

 

[Commodore]

The 2025 models don't even have this rubber part. I'm not sure it does anything.

 

[Karearea]

The 2025 models don't even have this rubber part. I'm not sure it does anything.

I’m very interested to see what this area of the roof gutter looks like now please. I think this is part of the cause of water dripping down the A pillar and causing the water issues between seals.
Could you please photo this when convenient?

 

[Karearea]

I’d also replace the screw provided with a SS one as they are prone to rusting for obvious reasons!

 

[Commodore]

I’m very interested to see what this area of the roof gutter looks like now please. I think this is part of the cause of water dripping down the A pillar and causing the water issues between seals.
Could you please photo this when convenient?

Here is a picture from a dealer's website of a 2025. Notice that there is no upper rubber windshield trim.

 

[Shopkeep]

Here is a picture from a dealer's website of a 2025. Notice that there is no upper rubber windshield trim.

View attachment 7899823

That's a very interesting change, the QM @scottandserena have also does not have the drain gutter at the top of the windscreen.

 

[Tazzieman]

Probably 18 + months ago I posted on this forum that this rubber piece with thin channel required regularly cleaning with a piece of plastci wire, and an occasional removal and scrubbing. Front and rear,
And a marine grade S/S screw to hold in place.
Pour water into your gutter and see where it ends up. You may get a hatful ;<)

 

[CRH]

Probably 18 + months ago I posted on this forum that this rubber piece with thin channel required regularly cleaning with a piece of plastci wire, and an occasional removal and scrubbing. Front and rear,
And a marine grade S/S screw to hold in place.
Pour water into your gutter and see where it ends up. You may get a hatful ;<)

Where, is there full instructions. I've never removed or changed any screws

 

[255/85]

The 2025 models don't even have this rubber part. I'm not sure it does anything.

It appears to do little more than collect bugs and debris between it and the metal gutter.

Where, is there full instructions. I've never removed or changed any screws

It's just a single screw accessible from the underside. I've considered using silicone to seal it in place and then removing the ones at the rear to encourage all water to drain rearward. I'm not sure it would have the effect I want when parked nose down.

 

[YANG]

Green and red do not have rubber strips either

 

[Tazzieman]

Green and red do not have rubber strips either

It's the drip rail corner rubbers we're talking about. As seen on both green and red!