Lighted Ignition Keyhole Upgrade for INEOS Grenadier by Agile Offroad

[BARAKKA]

It's about dang gone time! I just ordered mine. I'll let you know how the install went.

LUXLOCK Lighted Ignition Keyhole Upgrade for INEOS Grenadier by Agile Offroad » Agile Offroad

LUXLOCK Lighted Ignition Keyhole Upgrade for INEOS Grenadier. Plug-and-play LED illumination improves visibility, usability, and OEM-style integration.

agileoffroad.com

 

[C-Mack]

What triggers it to come on when you open a door and the interior lights turn on? When you turn on the instrument lights? Would hate to have it on during daylight hours all the time.

 

[RB60]

Ordered mine today. I'll update when its installed.

 

[ryanjl]

What triggers it to come on when you open a door and the interior lights turn on? When you turn on the instrument lights? Would hate to have it on during daylight hours all the time.

Looks like it taps into a fuse (page 5, step 12 here: https://agileoffroad.com/wp-content...ion-Keyhole-Upgrade_Intallation-Manual_LR.pdf)

Not sure what fuse that is.

 

[C-Mack]

Looks like it taps into a fuse (page 5, step 12 here: https://agileoffroad.com/wp-content...ion-Keyhole-Upgrade_Intallation-Manual_LR.pdf)

Not sure what fuse that is.

Looks like it pigtails into fuse FC01 which shows as a "Reserved" fuse location. Without putting a meter on it curious if that fuse location is 12V ignition on or off? If it's 12V ignition on then the light won't be on until after you've already inserted the key?

 

[WaterOx]

It illuminates on door opening and stays illuminated while vehicle is on.

 

[maxgralph]

Another option, been around for a while: https://www.octodyne.net/products/p/grenadier-keyhole-led-light-and-wiring-harness

 

[BEM-S4]

Another option, been around for a while: https://www.octodyne.net/products/p/grenadier-keyhole-led-light-and-wiring-harness

I've got this one, very happy with it and the install was incredibly easy compared to the Agile option.

 

[GrenAF]

Anyone know of a fuse that comes on with door open but turns off with ignition?

Someone metioned the footwell lights may do that but perhaps that's canbus controlled?

 

[skinny_tom]

Ordered mine today. I'll update when its installed.

I ordered one on the 17th. I imagine that you are also waiting on the backorder to be filled.

 

[RB60]

I ordered one on the 17th. I imagine that you are also waiting on the backorder to be filled.

Yes, AO just wrote me to tell me that. They are due inn next week so Hopefully soon.

 

[skinny_tom]

Yes, AO just wrote me to tell me that. They are due inn next week so Hopefully soon.

You must be on the special customer list. They didn't bother to inform me. I had to research the issue on my own.

 

[RB60]

You must be on the special customer list. They didn't bother to inform me. I had to research the issue on my own.

Actually, I emailed them asking them why it had not shipped yet. LOL.

 

[greenovals]

I've only had it installed for a few days, but as of now I have not gotten any error messages from having it tied into the footwell light. I will say that it is EXTREMELY FRAGILE. I dropped it onto the workbench from at most twelve inches and it broke in half. After fixing that I continued to rewire and install the plugs to accept the footwell light.

 

[skinny_tom]

I've only had it installed for a few days, but as of now I have not gotten any error messages from having it tied into the footwell light. I will say that it is EXTREMELY FRAGILE. I dropped it onto the workbench from at most twelve inches and it broke in half. After fixing that I continued to rewire and install the plugs to accept the footwell light.

Thank you for sharing the information. It is my intention to wire it to the foot well light as well. No need to have it on all the time. It appears you added a couple of connectors for a clean install. Care to share which ones they are?

 

[greenovals]

Here's the packing list from Mouser. I obviously bought more than needed for the project.