The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.

High load aux switch help please

Bilco

Grenadier Owner
Local time
8:07 AM
Joined
Nov 21, 2025
Messages
1
Location
Australia
After much fault finding I have found that my vehicle is missing the bridging plate on the 5 stud busbar. Anyone know where I can track one down?

Attached is a photo of my own busbar housing (though note that the busbar plate itself is missing, normally expected to sit under the fuses). Additionally, I've also attached a picture of a fully functional one I've found elsewhere on the forum (credit to @TheDocAUS for that one) to hopefully make it more obvious which part I'm missing.

Thanks Will


ac518996-9f9f-43b7-a188-412ee42f463c.jpg
IMG_4351.jpeg
 
Last edited:
After much fault finding I have found that my vehicle is missing the bridging plate on the 5 stud busbar. Anyone know where I can track one down?

Attached is a photo of my own busbar housing (though note that the busbar plate itself is missing, normally expected to sit under the fuses). Additionally, I've also attached a picture of a fully functional one I've found elsewhere on the forum (credit to @TheDocAUS for that one) to hopefully make it more obvious which part I'm missing.

Thanks Will


View attachment 7916921View attachment 7916918
A busbar without the busbar.

Obviously follow Rok Dr suggestion first.

You can buy a spare from Swe Check. The whole fuse holder, unless Swe Check can tell you a specific part number just for the busbar plate. Ask as they known their stuff.

I have a spare fuse holder, so I know you can get them.

EDIT: info on the busbars:


1280_6i8g6qq62wd7-jpg.7826771
 
Last edited:
Back
Top Bottom