Decided to build my own from Aluminum pieces I had lying around the shop. Still have to 3d print a tip holder and end cap for the main tube.
Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.
Yeah, I am going to use handles to attach it to the cross rail so it can be removed if necessary. I am also going to center it on the door and so it doesn't interfere with the front door and put it on the right hand side so the ground side of the saw is facing the elements.
There's only one problem , and it relates to electrons!
The gasser fits in the same mount!!
Yeah, the last place I would (never) think to carry my saw
To each their own. I am far more likely to encounter a downed tree on a fire access trail than narrow bush. Washouts are common but rarely narrow to that extent. And if so the mount goes in the rear.Yeah, the last place I would (never) think to carry my saw
For lighter duties I use an electric chainsaw quite a bit. It would work better in conifer forest situations (such as commonly found in the N hemisphere) but in eucalyptus and acacia and similar hardwood situations found locally the batteries (mine has dual batteries) do not last that long. You'd be sitting around waiting for a recharge. Unless you carry extra batteries. Which is always a good idea!
I am not familiar with your wood types but I know the electric saw is kind of useless on elm or oak. Ironwood is ever worse. But I have an 036 and 025 that I am going to drill holes for also. Haven't found anything yet the 036 won't chew through and if it gets greasy I have a 441 Magnum.
For a moment I thought you meant you shot trees down.
It's a Stihl thing in NAM...
