What did you do with your Grenadier today?

[ADVAW8S]

Finally finished the GMRS install. I cut into the plastic and mounted adapter for my Midland 275 mic. When I'm not using the radio, the mic goes in my Tougher front seat pocket. When in use, I attached my mic to a set up I got from Amazon. The color match is almost spot on and cost less than 15 dollars.

 

[LabRat]

This thread always confuses me - "what did you do with" vs. "what did you do to". Anyway couple projects over the past week or so.

First was, I got tired of the seatbelt coming across my neck, yeah, I'm somewhat vertically challenged. Anyway, saw this over on FB, so took a chance.
Front Seatbelt holder for 2015-2023 Ford Mustang

Easy install, sold as a pair. The holes are a bit wider than our headrests, but they fit with a little squeezing or you could dremel out one of the holes a bit. .

Next was to FINALLY install a LensunSolar panel on my hood. Took nearly a month for all the bits and pieces to arrive. I didn't go with their MPPT controller, but installed a CTEK 250SE using at GP Factor bracket. Still need to finalize the wiring, but got the panel mounted. Getting wires through the firewall was a B*#ch. Seems they taped the wires to the grommets on the engine side, so couldn't just "poke" the wires through.

Here are the specs of the solar panel - nothing crazy, but I don't have the roof space to put panels and the hood is wasted space anyway.

Finally, just for fun

 

[Green Gren]

My Leitner roof rack came in handy when I had to take (5) 33+” wheels/tires back from the tire shop. Three in back and two on the roof. I switched from 18’s with snow rated Yokohama AT4’s to 17’s with RT Yokohama X-AT’s.

 

[Krabby]

This thread always confuses me - "what did you do with" vs. "what did you do to". Anyway couple projects over the past week or so.

First was, I got tired of the seatbelt coming across my neck, yeah, I'm somewhat vertically challenged. Anyway, saw this over on FB, so took a chance.
Front Seatbelt holder for 2015-2023 Ford Mustang

Easy install, sold as a pair. The holes are a bit wider than our headrests, but they fit with a little squeezing or you could dremel out one of the holes a bit. .

View attachment 7904091

Next was to FINALLY install a LensunSolar panel on my hood. Took nearly a month for all the bits and pieces to arrive. I didn't go with their MPPT controller, but installed a CTEK 250SE using at GP Factor bracket. Still need to finalize the wiring, but got the panel mounted. Getting wires through the firewall was a B*#ch. Seems they taped the wires to the grommets on the engine side, so couldn't just "poke" the wires through.

Here are the specs of the solar panel - nothing crazy, but I don't have the roof space to put panels and the hood is wasted space anyway.



View attachment 7904092
View attachment 7904093View attachment 7904094View attachment 7904095View attachment 7904096

Finally, just for fun

View attachment 7904097

Who did your hood blackout (the spot under the now-installed solar panel)?

 

[AaronS]

Added a little bling! Thanks @Brandtnm !!

 

[Itsdchz]

Getting ready for a winch and HD bumoer

 

[CRH]

This thread always confuses me - "what did you do with" vs. "what did you do to". Anyway couple projects over the past week or so.

First was, I got tired of the seatbelt coming across my neck, yeah, I'm somewhat vertically challenged. Anyway, saw this over on FB, so took a chance.
Front Seatbelt holder for 2015-2023 Ford Mustang

Easy install, sold as a pair. The holes are a bit wider than our headrests, but they fit with a little squeezing or you could dremel out one of the holes a bit. .

View attachment 7904091

Next was to FINALLY install a LensunSolar panel on my hood. Took nearly a month for all the bits and pieces to arrive. I didn't go with their MPPT controller, but installed a CTEK 250SE using at GP Factor bracket. Still need to finalize the wiring, but got the panel mounted. Getting wires through the firewall was a B*#ch. Seems they taped the wires to the grommets on the engine side, so couldn't just "poke" the wires through.

Here are the specs of the solar panel - nothing crazy, but I don't have the roof space to put panels and the hood is wasted space anyway.



View attachment 7904092
View attachment 7904093View attachment 7904094View attachment 7904095View attachment 7904096

Finally, just for fun

View attachment 7904097

Looks as though your seat belt holder would fit better the other way up?

 

[LabRat]

Who did your hood blackout (the spot under the now-installed solar panel)?

I did, the vinyl came with the kit. Was a pretty easy install.

 

[LabRat]

Looks as though your seat belt holder would fit better the other way up?

It didn’t come with instructions or pictures, so I’ll flip it around, give it a try and report back.

 

[landmannnn]

Our local service station has just installed an adblue pump. Just waiting for it to commissioned and the price determined.

It was 49 Euro cents per litre here.

 

[Logsplitter]

My Leitner roof rack came in handy when I had to take (5) 33+” wheels/tires back from the tire shop. Three in back and two on the roof. I switched from 18’s with snow rated Yokohama AT4’s to 17’s with RT Yokohama X-AT’s.

View attachment 7904111

Did you do a clean and jerk weight lifting move with one in each hand to get them up there

 

[Green Gren]

Did you do a clean and jerk weight lifting move with one in each hand to get them up there

The real challenge was me being 5’9”. Really nothing too difficult, mostly awkward. I weight train with some regularity so this wasn’t too bad. I only had to get the tire up against the rack and then it was just sliding them up into place.