What did you do with your Grenadier today?

[Chrisinboston]

‘Merica! pretty happy with the results on this project. Tip- use a pin for air bubbles.

 

[LabRat]

View attachment 7896804
‘Merica! pretty happy with the results on this project. Tip- use a pin for air bubbles.

Looks good. The company I got mine from off Amazon was total crap. Perfect cut, but impossible to install because the backing paper was heavy vinyl that wouldn't release and was wrinkled from the start. Word to the wise - Do Not buy this one https://www.amazon.com/dp/B0CP5D6N38?tag=globalgrena0b-20

 

[DVA Mechanics]

Thanks to @DVA Mechanics for awesome products and even better customer service! The cup holders and storage are a must! Thank you to forum member on the center console rear seat cupholder and organizer from Kenimoto!
View attachment 7896667View attachment 7896676View attachment 7896668View attachment 7896669View attachment 7896670View attachment 7896671View attachment 7896672View attachment 7896673View attachment 7896674View attachment 7896675

Thanks for the awesome shout out!

 

[RYAustralia]

Installed the start stop stopper from Grenadier USA. Flawless and looks factory. View attachment 7896189

Ps mine is the clear(silver) version.

 

[bigleonski]

Thanks for the awesome shout out!

All this good US stuff kinda sucks. You guys need to find an Aussie rep so it doesn't cost us 2 or 3 times the price in freight.

 

[Itsdchz]

All this good US stuff kinda sucks. You guys need to find an Aussie rep so it doesn't cost us 2 or 3 times the price in freight.

These sentiments are truly on both sides! We cannot get enough of OZ parts and pieces. This holds true for our IG and our FJ80!

 

[LabRat]

These sentiments are truly on both sides! We cannot get enough of OZ parts and pieces. This holds true for our IG and our FJ80!

Here Here!!! You guys down under definitely have some awesome bits of kit.

 

[Krabby]

View attachment 7896804
‘Merica! pretty happy with the results on this project. Tip- use a pin for air bubbles.

Not trying to be a hater in any way (I've been thinking of doing the same thing since I got my truck) - but am I just too OCD in wanting 13 stripes and 50 stars?

 

[CRH]

Not trying to be a hater in any way (I've been thinking of doing the same thing since I got my truck) - but am I just too OCD in wanting 13 stripes and 50 stars?

I couldn't have the Union Jack if the red stripes aren't done properly on the cross. I have enough problems with alloy wheels that go in opposite directions on each side of the car

 

[Bayford]

Not trying to be a hater in any way (I've been thinking of doing the same thing since I got my truck) - but am I just too OCD in wanting 13 stripes and 50 stars?

How about a Garden State Liberty and Prosperity Flag - that's quite smart - though I see from your handle that you seem to have christened your Grenadier Ol Glaurie so perhaps not appropriate

 

[Dreadfully Distinct]

I felt lonely, so I parked next to it…

 

[rovie]

I felt lonely, so I parked next to it…

View attachment 7897026

View attachment 7897027

View attachment 7897028

View attachment 7897029

Both beautiful vehicles. However, after 2 years with the Grenadier and selling my Defender 110, I no longer wanted to trade it in.

 

[pmatusov]

Test-fit a 16" steel wheel on my Grenadier - clears the front brake calipers with a 1/4" spacer, while still remaining hub-centric. Plenty of threads on the lug studs.
Short - term: a 255/85R16 second spare.
Long - term: a set of 8.25R16 XZLs. Maybe.

 

[OverlandGearGuy]

38,000. Getting up there

 

[DVA Mechanics]

All this good US stuff kinda sucks. You guys need to find an Aussie rep so it doesn't cost us 2 or 3 times the price in freight.

We have some pretty efficient shipping!!!

 

[Baron von Teuchter]

Collected 8 cubes of free firewood - offcuts from a company who make summer houses and timber buildings and stuff. Just softwood but bone dry and packs very well into a wood burning stove.

Grenadier tows like an absolute boss.

Next job, hand stacking 8 cubes of the stuff!

 

[Baron von Teuchter]

Is

Test-fit a 16" steel wheel on my Grenadier - clears the front brake calipers with a 1/4" spacer, while still remaining hub-centric. Plenty of threads on the lug studs.
Short - term: a 255/85R16 second spare.
Long - term: a set of 8.25R16 XZLs. Maybe.

View attachment 7897044

That from a sprinter?

 

[pmatusov]

Is


That from a sprinter?

yessir

 

[Baron von Teuchter]

Ahhhh, I was looking for a spare set of 17’s and saw some sprinter 16’s for sale - I did contemplate trying to find a scabby second hand one to see if it fitted but never got round to it (and found a set of cheap Ineos 17’s in the meantime).

Really interested to see how you get on with these - bet it rides well on 16’s!

 

[landmannnn]

Drained a litre from each of the coolant tanks, so now both at Max.

Heating and cooling work much better now!