The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.

Powerlet outlet for fridge

cdsvt

Grenadier Owner
Local time
2:50 PM
Joined
Nov 10, 2022
Messages
105
Location
Vermont, USA
I am in the middle of putting my National
Luna fridge into the ineos for an event. The fridge uses a powerlet plug. I have a female powerlet outlet from a prior project that I plan to install on the driver side of the cargo area. Any tips on how to wire it? Do I just grab power from the cigar plug, and ground to the chassis? What conditions allow power to the stock cigar outlet? Is it constant power? Ignition switched? Some set of switches and driving conditions?
 
I am in the middle of putting my National
Luna fridge into the ineos for an event. The fridge uses a powerlet plug. I have a female powerlet outlet from a prior project that I plan to install on the driver side of the cargo area. Any tips on how to wire it? Do I just grab power from the cigar plug, and ground to the chassis? What conditions allow power to the stock cigar outlet? Is it constant power? Ignition switched? Some set of switches and driving conditions?
I did this and it works great.
I wired a fuse block to the 2nd battery direct.
I mounted the fuse block to the 7 position busbar lid with nylon screws/nuts
Then I added the 2 12VDC sockets and 92W USB power supply.
Took 2 hours.

Screenshot 2025-09-21 at 7.52.06 PM.png

Screenshot 2025-09-21 at 7.50.50 PM.png
 
Tap into the cigar plug's wiring. It's ignition-switched; it only has power when the vehicle is on. Run a fused wire (10-15A) from that positive source to your new outlet. Find a good bare metal spot nearby for the ground. This is the simplest way and ensures the fridge only runs with the engine on to protect your battery.
 
I just plugged mine into the socket in the back of the Grenny. It only has power when engine is running or if engine off I flip the PWR switch on the panel it also powers the fridge and other items.
 
I did this and it works great.
I wired a fuse block to the 2nd battery direct.
I mounted the fuse block to the 7 position busbar lid with nylon screws/nuts
Then I added the 2 12VDC sockets and 92W USB power supply.
Took 2 hours.

View attachment 7909341
View attachment 7909343
I’ve done pretty much the same, with the same BlueSea fuse block and an outlet to an ARB fridge socket.
 
I put my fridge on the passenger side. I put in a Hella-style receptacle into the removable trim panel piece nearest the large door. There's a ground already under the trim panel towards the back of the wheel arch, and I drew power directly off the aux battery (with an in-line fuse near the battery); that way the circuit is always hot. I can control the fridge via a phone app, including on/off, battery preservation, etc.
 
Back
Top Bottom