Finished up my phone mount (also ran wire for radar detector ...yes I know the Grenny is not speed demon but can get a ticket going 35 in 25...so I like the peace of mind)....will show that if wanted but not much to it. Blendmount rvm mount for detector of choice...run remote switch and power along headliner, behind A-pillar, down under dash to power source and ground...then mount MUTE button and remote to personal preference.
The more important part was getting my phone mount finished and a wire that works better for distance and location I put everything. The USB wire is 1.6 ft long. Gives little slack but allows to be fairly neat still. Only big difference is a right angle head on one end...so that it does not stick out and hit my leg while driving. https://www.amazon.com/dp/B0CJYHS14X?tag=globalgrena0b-20
For my actual mount, I have 5 parts:
- Agile Offroad Dash Ball Mount https://agileoffroad.com/product/dash-ball-mount-for-ineos-grenadier-by-agile-offroad/
- Quad Lock Phone Case for Magnetic Mount WIreless Charging
- Car MAG Wireless Charging Head https://www.quadlockcase.com/collections/accessories/products/mag-wireless-charging-head
- Truck/Car- Ball Top Cap Adaptors (1" ball adaptor) https://www.quadlockcase.com/collec...BTC1UQ0EiLCJvcHRpb24yIjoiUUxILU1BRy1XQ0gtMiJ9
- Ram Mount Double Socket Arm- B Size MEDIUM https://rammount.com/products/ram-b-201u
Some explanations on how it works for me:
1. The AO Ball Mount is easy...bottom right bolt is longer than others....so remember when reinstalling with new hardware...but just snug it up and fits great. Well built.
2. The magnetic mount wireless allows me to place and remove phone without doing the turn to lock and having lever to unlock like on motorcycle I am accustomed...but still secure enough for bouncy roads.
3. When get MAG Wireless Charging Head it is set to go onto a gimbal or direct mount....so have to convert the MAG head to a ball mount head with adaptor purchased...just unscrew and replace.
4. I have the medium double ball arm...wish I would have used the SHORT length to get top of my phone below bottom edge of display screen of dash...but that can wait if reallly bothers me and dont get used to it.
5. Then once have wire ran between USB outlet up to wireless port on charging head...simple as placing phone against it and it is solid and secure until you remove it by hand just by pulling towards yourself to break the magnetic pull.
Everything works great...feels secure. Will update if anything changes in function or reliability.
#AgileOffroad #QuadLock #RamMount
The more important part was getting my phone mount finished and a wire that works better for distance and location I put everything. The USB wire is 1.6 ft long. Gives little slack but allows to be fairly neat still. Only big difference is a right angle head on one end...so that it does not stick out and hit my leg while driving. https://www.amazon.com/dp/B0CJYHS14X?tag=globalgrena0b-20
For my actual mount, I have 5 parts:
- Agile Offroad Dash Ball Mount https://agileoffroad.com/product/dash-ball-mount-for-ineos-grenadier-by-agile-offroad/
- Quad Lock Phone Case for Magnetic Mount WIreless Charging
- Car MAG Wireless Charging Head https://www.quadlockcase.com/collections/accessories/products/mag-wireless-charging-head
- Truck/Car- Ball Top Cap Adaptors (1" ball adaptor) https://www.quadlockcase.com/collec...BTC1UQ0EiLCJvcHRpb24yIjoiUUxILU1BRy1XQ0gtMiJ9
- Ram Mount Double Socket Arm- B Size MEDIUM https://rammount.com/products/ram-b-201u
Some explanations on how it works for me:
1. The AO Ball Mount is easy...bottom right bolt is longer than others....so remember when reinstalling with new hardware...but just snug it up and fits great. Well built.
2. The magnetic mount wireless allows me to place and remove phone without doing the turn to lock and having lever to unlock like on motorcycle I am accustomed...but still secure enough for bouncy roads.
3. When get MAG Wireless Charging Head it is set to go onto a gimbal or direct mount....so have to convert the MAG head to a ball mount head with adaptor purchased...just unscrew and replace.
4. I have the medium double ball arm...wish I would have used the SHORT length to get top of my phone below bottom edge of display screen of dash...but that can wait if reallly bothers me and dont get used to it.
5. Then once have wire ran between USB outlet up to wireless port on charging head...simple as placing phone against it and it is solid and secure until you remove it by hand just by pulling towards yourself to break the magnetic pull.
Everything works great...feels secure. Will update if anything changes in function or reliability.
#AgileOffroad #QuadLock #RamMount
Attachments
Last edited:
