the place to upload your MOAB images for the community
The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Hands Free Phone Mic - quality / performance / position, is unacceptable.

So how big a job is this? How easy is it to run the new cables in?
It's all pretty easy - i soldered the new cables in but you could crimp them. It would be a definite warranty issue though, you need to cut the loom in three places, including around the ecall unit. I routed them from the roof console down the driver's side A pillar and into the head unit.
 
Do you know where the head unit is ground to and do you have any pictures of the grounding point? I’m wondering if this can be improved rather than reroute the wire from outside the harness.
It has a chassis ground connection directly behind the head unit in the driver's side footwell. Unfortunately the issue isn't poor grounding, it is crosstalk between wires in the loom. At least it was on mine.
 
It's all pretty easy - i soldered the new cables in but you could crimp them. It would be a definite warranty issue though, you need to cut the loom in three places, including around the ecall unit. I routed them from the roof console down the driver's side A pillar and into the head unit.
Would attaching some of those circular magnets around the cable make a difference?
 
I don't have the guts to do that while the car's under warranty, but great to know there's a fix.
 
  • Like
Reactions: CRH
Already posted this on another thread.
Today I removed the panel and fitted some sound deadening and sound absorption materials. Currently, my hands free experience has been mixed. Always easy to understand but sometimes I have complaints concerning quality of the call. I am hoping that reducing resonance around the mic might help. Will update over the coming days.
 

Attachments

  • IMG_2449.jpeg
    IMG_2449.jpeg
    3.7 MB · Views: 13
  • IMG_2450.jpeg
    IMG_2450.jpeg
    4.7 MB · Views: 7
  • IMG_2453.jpeg
    IMG_2453.jpeg
    4.6 MB · Views: 6
  • IMG_2458.jpeg
    IMG_2458.jpeg
    1.4 MB · Views: 6
  • IMG_2457.jpeg
    IMG_2457.jpeg
    1.7 MB · Views: 6
  • IMG_2456.jpeg
    IMG_2456.jpeg
    3.9 MB · Views: 13
Already posted this on another thread.
Today I removed the panel and fitted some sound deadening and sound absorption materials. Currently, my hands free experience has been mixed. Always easy to understand but sometimes I have complaints concerning quality of the call. I am hoping that reducing resonance around the mic might help. Will update over the coming days.
I see there is a microphone to the E call? Where is the microphone to the infotainment system located, do you know?
 
Back
Top Bottom