Grab rail light bar mount

[doonunit]

I’m looking to buy a Stedi micro touch dual light to be mounted right at the grab rail power supply. Stedi have the exact mounting I would like, pictured on their website but they don’t sell it, does anyone know where I could get something like pictured below?
Kinda tricky to see but it looks like it just clamps to the grab rails. I’ve got the same roof rack so needs to be near identical to the picture.

 

[tangocharlie80]

I 3d printed some brackets. Is this the sort of thing you are looking for?

 

[DenisM]

I’m looking to buy a Stedi micro touch dual light to be mounted right at the grab rail power supply. Stedi have the exact mounting I would like, pictured on their website but they don’t sell it, does anyone know where I could get something like pictured below?
Kinda tricky to see but it looks like it just clamps to the grab rails. I’ve got the same roof rack so needs to be near identical to the picture.
View attachment 7922969

I've been contemplating the Stedi lights... as for clamps, I discovered there are dozens of options amongst motor cycle accessory outlets... "handle bar clamps and attachments". 25mm approx. is a common size. I'm still looking... and in my current decluttering blitz I daren't arrive home with a 3D printer and hide while I learn how to master the software and tech stuff... that truly is a "step too far"...

 

[Tenac]

I 3d printed some brackets. Is this the sort of thing you are looking for?View attachment 7923043

Wanna share the file ?

 

[Karearea]

I also have bought these lights (strangely super cheap in NZ for a change! )
And I’m also clamp challenged with the OEM full rack so would be super happy with any suggested options
I’m overseas at the moment but on return to Noo Zild intend to fix mine up.
Any suggestions welcome and if I find anything myself I’ll report back

 

[doonunit]

I also have bought these lights (strangely super cheap in NZ for a change! )
And I’m also clamp challenged with the OEM full rack so would be super happy with any suggested options
I’m overseas at the moment but on return to Noo Zild intend to fix mine up.
Any suggestions welcome and if I find anything myself I’ll report back

I contacted Stedi and turns out they do sell the pictured clamp. They didn’t say specifically which one it was, but it must be this one linked below. The lighting in the picture makes it look different but the measurements seem to line up.

https://www.stedi.com.au/vice-bull-bar-tube-clamps-mc.html?utm_source=google&utm_medium=cpc&utm_content=nonbrand&gad_source=1&gad_campaignid=21228053932&gbraid=0AAAAADpzbFkMPWUbV6m4qG3ZFJx9-k_oH&gclid=Cj0KCQiAk6rNBhCxARIsAN5mQLvrimkq0uZUX4A-ej-KHCzs-vWDyxo5gqRyWQfPe1QEplelN5RYo0MaAjLwEALw_wcB

 

[doonunit]

I 3d printed some brackets. Is this the sort of thing you are looking for?View attachment 7923043

Nice, they look a better shape than the Stedi ones I found. Can you share the STL? Or better yet the fusion 360 file if you did it on there.
What material did you print it with? It’d wanna be something decent to hold up in the Aus sun.

 

[Shopkeep]

I contacted Stedi and turns out they do sell the pictured clamp. They didn’t say specifically which one it was, but it must be this one linked below. The lighting in the picture makes it look different but the measurements seem to line up.

https://www.stedi.com.au/vice-bull-bar-tube-clamps-mc.html?utm_source=google&utm_medium=cpc&utm_content=nonbrand&gad_source=1&gad_campaignid=21228053932&gbraid=0AAAAADpzbFkMPWUbV6m4qG3ZFJx9-k_oH&gclid=Cj0KCQiAk6rNBhCxARIsAN5mQLvrimkq0uZUX4A-ej-KHCzs-vWDyxo5gqRyWQfPe1QEplelN5RYo0MaAjLwEALw_wcB

The clamps from Stedi are the Vice (SML Size) 22-30mm, as shown used here:
Post in thread 'Work light on roof grab bar'
https://www.theineosforum.com/threads/work-light-on-roof-grab-bar.12415826/post-1333288456

The Stedi clamps are high quality and rock solid. They can be used on the grab rails and the ladder, just go with those.
Post in thread 'Show us your mods.'
https://www.theineosforum.com/threads/show-us-your-mods.12413129/post-1333316932

Here they are with the Micro Touch 13.9

 

[Tenac]

The clamps from Stedi are the Vice 22-30mm, as shown used here:
Post in thread 'Work light on roof grab bar'
https://www.theineosforum.com/threads/work-light-on-roof-grab-bar.12415826/post-1333288456

The Stedi clamps are high quality and rock solid. They can be used on the grab rails and the ladder, just go with those.
Post in thread 'Show us your mods.'
https://www.theineosforum.com/threads/show-us-your-mods.12413129/post-1333316932

The forum links work but the ones in the posts do not for me I get 404 Error from Stedi

 

[Tylerb42]

I went with these https://a.co/d/09wNEcs4 and longer screws before I decided to just mount to the roof rack. Worked perfectly, just need longer screws to mount to the Stedi lights through the bracket

 

[Shopkeep]

The forum links work but the ones in the posts do not for me I get 404 Error from Stedi

I just tried and worked my end? The link is to the Stedi Australian site, not sure why they would geo-block from US?