Lights EXT 5 Fuse Location?

[Deadman]

Frying to find the dang fuse location zzfor EXT 5 with no luck. I’m in the US with a left hand drive vehicle for reference.

 

[TheDocAUS]

Did you look here?

Thread 'Main fuses used in INEOS Grenadier'

May 3, 2023

There are at least SIX different fuse types can be used in the INEOS Grenadier, being:

1. Mini blade fuse (not a low-profile Mini fuse or a Micro2 fuse);
2. JCase Low Profile fuse (895/PAL);
3. JCase Long Profile fuse (495/PAL) - also called just a JCase fuse;
4. ZCASE® MEGA fuse (and MEGA SHUNTS);
5. Midi fuse;
6. MEGA Fuse (Midi style); and
7. some schematics here.

The precise specifications of each fuse type can be read here.

@bnebenda has compiled a list of the all the Grenadier fuses into an Excel Spreadsheet. It can be downloaded here.

MINI...

• TheDocAUS
• grenadier ineos
• Replies: 243
• Forum: INEOS Universal Parts List

• 

I am looking for the exact post.

 

[TheDocAUS]

See post linked below. Look at the table, which says FL03. Fuse FL03 is located in the High Load Auxiliary Switch Panel option fuse box.

The information is also in the Rok Dr Guide. Print it out and keep a copy with the car.

Post in thread 'Main fuses used in INEOS Grenadier'

May 23, 2023

INTERIOR ELECTRICAL CENTRE (SECONDARY FUSE BOX 1B) - High Load Auxiliary Switch Panel option

This mini fuse box is installed if you have the aux power option in your car. The fuse box is located on a bracket between the 7 stud busbar and the Main Battery.

Mini blade fuses used
The Mini blade fuses are used are rated at 5 amps (single fuse) and 25 amps (3 fuses).

Relays
It appears the fuses are used to fuse the four 614 Relays.

Image
There is no fuse diagram at present only a photo from a Production vehicle.

High Load Auxiliary Switch...

• TheDocAUS

• 
• 

 

[Deadman]

Bingo. I had searched through the thread, but for some reason I missed that section. Thanks! Exactly what I was looking for.

 

[Deadman]

So, um anyone have any experience refitting that 25A rocker with a 30A? When I looked over the Baja Design spec sheets for the LP4s, I saw 5.5A each or 22A total for all four. In the itty bitty fine print, you can see each actually draws 6.5A. Not a fan of 26A on a 25A rocker. 10awg wiring should be fine with that short of a run.