The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.

Yakima mod

HereinDaRockies

Grenadier Owner
Local time
12:48 AM
Joined
Sep 12, 2024
Messages
734
Location
Denver, Co
Anyone using a Yakima mod drawer system in the grenadier? Much lower cost than those boutique brands, and much easier to resell since it’s not bespoke to the grenadier

The height is also 7” so it’s perfectly aligned with the rear seats

 
I was also looking at these and I’m interested in the lower cost. The LG size looks just right for the grenadier at 36” x 33.5” x 7”.

However, yakimas installation is just tying it down. I’d probably try to see one in person so I can figure out how to make a bracket to attach it to grenadier mounting points.
 
Here's one report of it from @JordanGuss

 
dimensionally speaking it looks like the LG Mod drawer doesn't go deep enough to be flush against folded down rear bench. Gap appears to be around 10". So for sleeping, you'd need another layer, which would be annoying and hackish, and defeats the purpose of spending $1200 on a drawer, to still need to apply some hack
 
Looks great, just concerned about how useful a 7” drawer would be height wise, they’d be a lot of stuff I used to keep in my previous drawers that wouldn’t fit in those.
 
Back
Top Bottom