The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.

Window Tint Cost

muckmuck

Grenadier Owner
Local time
6:30 PM
Joined
Dec 22, 2025
Messages
4
Location
Washington State
Hello- I just got a quote to do a ceramic tint on all windows (excluding windshield). $680 and $199 for the Safari windows. $680 sounds like a lot but what doesn't cost a lot these days. $199 for the Safari windows sounds ridiculous to me considering they can be removed. Anyone care to share their thoughts and what you paid? Thanks!
 
I paid that for a 4 door truck with high quality materials.. It has the extra rear quarter windows so should be right.
 
I've had a number of vehicles tinted in the past. The most important thing to check is the Total Solar Energy Rejected. The higher the TSER %, the more solar heat is rejected. Every reputable manufacturer will publish these figures as part of a table that includes the percentage tint, TSER, IR rejection, visible light transmission (VLT), etc.

The Grenadier has some fairly flat windows. So it should not be that difficult to apply tint to. If the windows or windshield are curved somewhat (usually convex) then the tinter usually has to use a heat gun to "shrink wrap" the tint before final application. Flat glass means no heat shrink, which should lower labor costs.

Also make sure you're using a good ceramic tint.
 
I've had a number of vehicles tinted in the past. The most important thing to check is the Total Solar Energy Rejected. The higher the TSER %, the more solar heat is rejected. Every reputable manufacturer will publish these figures as part of a table that includes the percentage tint, TSER, IR rejection, visible light transmission (VLT), etc.

The Grenadier has some fairly flat windows. So it should not be that difficult to apply tint to. If the windows or windshield are curved somewhat (usually convex) then the tinter usually has to use a heat gun to "shrink wrap" the tint before final application. Flat glass means no heat shrink, which should lower labor costs.

Also make sure you're using a good ceramic tint.
Thanks for the info. They use GeoShield Pro Nano Ceramic.
 
that film comes in 49-66% solar rejection. i have 66% on mine (an xpel product). It is noticeable cooler with the solar film even though i don't have it very dark.
on the safari windows i tinted it pretty dark.

i think you will be very happy with that film. its outstanding, at least mine is at 66%. the other values where comparable. i live in a very high cost city, i paid $700 for side windows, safari windows and one other unrelated thing.
 
Back
Top Bottom