Replaced the OEM plugs next to the wipers

[LAdrummer]

I’m not sure if any other owners have experienced this but the 18mm locking plugs next to the windshield wipers keep falling out. Not so locking after all. I replaced them with 7/8” plugs from of all places ACE Hardware (USA). The new plugs won’t pop out, won’t be lost, won’t frustrate me. I did have to bore an ever so slightly bigger hole. The new plugs can be removed.
All the best,
MM

 

[Jiman01]

These silicone versions have been working well also and go in without any mods. IIRC, the original recommendation from the forum was 19mm but I accidentally ordered the 18mm. The 18mm have stayed in place and were fussy enough to get in, I don’t think they’ll come out unless you get in there with a panel removal tool.

Amazon.de : MECCANIXITY 6pcs Silicone Snap in Locking Hole Plugs,18mm/0.7 Inch Mounting Diameter Narrow Groove Width 2mm Panel Seal Cover Round for Kitchen Bulkheads Waterproof Sealing Plugs Black

 

[Red5]

I ordered the plugs of amazon from the above May 19 post and they worked great

 

[BEM-S4]

Has anyone lost the cap that covers the base of the wiper stalk where it attaches to the vehicle? The one you'd remove to get at the bolt holding the wiper on? Need PN as one of mine has gone missing.

 

[Tidewater]

I’m not sure if any other owners have experienced this but the 18mm locking plugs next to the windshield wipers keep falling out. Not so locking after all. I replaced them with 7/8” plugs from of all places ACE Hardware (USA). The new plugs won’t pop out, won’t be lost, won’t frustrate me. I did have to bore an ever so slightly bigger hole. The new plugs can be removed.
All the best,
MM

I lost my caps a few weeks ago and was wondering what to do. You have saved me a bunch of time, Thank you!