Inexpensive rear door table $88

[Krbrown68]

Just want to share that a Wrangler JK or JL rear door table works perfectly in the Grenadier.
Just a few new holes need to be drilled in the drop down table mount. The bolts and spacers that come in the kit work great. Even the right thread pitch and length.
No mods to the car door needed.
Amazon $88.00
Sturdy and still allows access to the tool panel.
Way cheaper that any other option I found

 

[Chadd7]

Any rattles while driving? Also, are the holes drilled into plastic or into the steel?

 

[AUDIOBUS]

THIS is great forum form. And for the search.

 

[Krbrown68]

Any rattles while driving? Also, are the holes drilled into plastic or into the steel?

No rattles so far.
I added a couple pads between the two tables where they contact when folded using the soft side of Velcro
The entire thing is steel.
I removed the plastic factory door panel, laid it over the table frame as a template to tap the holes.
It will be obvious once you lay them over one another.

 

[Logsplitter]

Just want to share that a Wrangler JK or JL rear door table works perfectly in the Grenadier.
Just a few new holes need to be drilled in the drop down table mount. The bolts and spacers that come in the kit work great. Even the right thread pitch and length.
No mods to the car door needed.
Amazon $88.00
Sturdy and still allows access to the tool panel.
Way cheaper that any other option I found

That’s a good find