Full size Rhino Rack - does the price feel right?

[IGL]

more interesting accessories for the Gren, and prices are displayed in the online shop.

Ineos Grenadier - Offroad- & Adventure Tools by Black Sheep

We have put a lot of time and attention to detail into developing practical accessories for the Ineos Grenadier. Find out more now!

www.blacksheep-innovations.com

 

[singlefin]

It would be nice to see the price list for the accessories that they are offering!

Might browse through the LeTech bits on gwagenparts. Seems like good way to ballpark it.

 

[MrMike]

I cancelled the roof option on mine - there are several other MFRs that are now making low profit racks that fit closer to the roof and are significantly quieter driving than the RR and hold the same weight. I can always add in at the dealer before the vehicle arrives.

I'm still cautious with these as they haven't had the access to IA engineering specs like Rhino have. Some are using the rails and roof as load points which IMO aren't designed for the load.

 

[Saschi]

https://lennartz-technik.de/fileadmin/user_upload/grenadier_zubehoer_broschuere_2023_EN_web.pdf

The LeTech roof rack looks interesting

I talked to LeTeck a month ago. They said, the actual price list of the Grenadier accessories will be published soon. The roof rack will cost about 4.000€. The ladder with the possibility to install a jerry can will cost around 400€.

 

[MrMike]

I talked to LeTeck a month ago. They said, the actual price list of the Grenadier accessories will be published soon. The roof rack will cost about 4.000€. The ladder with the possibility to install a jerry can will cost around 400€.

$6500au + shipping (likely $1k) for a rack. yikes!

 

[ADVAW8S]

I emailed them and they gave me a proposal with price. Steep is all I can say. I would suggest emailing them and asking for price list.

 

[Tom109]

I am sticking with the factory Rhino rack. I am 100% confident in the design, it meets my load parameters, and doesn't connect to the tie-down bars.

 

[Rubicon Maybe]

spoke with Rhino USA about the Ineos Full Length Rhino Rack. They said that it was, and would only be, available through my Ineos dealer as it was developed specifically for Ineos. Thus they could not answer the following question, except to say that it appears wider than their typical racks.

What is the inner width of the full length Rhino Rack? The measurements I specifically am looking for is from the inner portion of the outside rail on the driver side to the inner portion of the outside rail on the passenger side. If anyone has this measurement, I would very much appreciate you sharing.

Thank you

 

[MrMike]

spoke with Rhino USA about the Ineos Full Length Rhino Rack. They said that it was, and would only be, available through my Ineos dealer as it was developed specifically for Ineos. Thus they could not answer the following question, except to say that it appears wider than their typical racks.

What is the inner width of the full length Rhino Rack? The measurements I specifically am looking for is from the inner portion of the outside rail on the driver side to the inner portion of the outside rail on the passenger side. If anyone has this measurement, I would very much appreciate you sharing.

Thank you

What do mean by the inner width? Is it the cross bars you are talking about?

 

[Rubicon Maybe]

What do mean by the inner width? Is it the cross bars you are talking about?

Yes, the cross-bar at the front and the back. Needing the length along the inside without the radius that would define the length on the outside of the cross-bar.

Thank you

 

[Bruce]

I emailed them and they gave me a proposal with price. Steep is all I can say. I would suggest emailing them and asking for price list.

832 Euro for the ladder plus 565 Euro for shipping. I think there will be cheaper ways to haul a Jerry can!

 

[MrMike]

spoke with Rhino USA about the Ineos Full Length Rhino Rack. They said that it was, and would only be, available through my Ineos dealer as it was developed specifically for Ineos. Thus they could not answer the following question, except to say that it appears wider than their typical racks.

What is the inner width of the full length Rhino Rack? The measurements I specifically am looking for is from the inner portion of the outside rail on the driver side to the inner portion of the outside rail on the passenger side. If anyone has this measurement, I would very much appreciate you sharing.

Thank you

@Rubicon Maybe width is 1475cm or 48.39239 bald eagles

 

[Rubicon Maybe]

@Rubicon Maybe width is 1475cm or 48.39239 bald eagles

Thank you so much. Assuming it is 1475mm. But I have no idea what is a bald eagle measurement, lol. Yet, I really like the phrasing, 48.39239 bald eagles ha ha

 

[Walter Z]

It would be nice to see the price list for the accessories that they are offering!

This is what I got from Letech back in May 2023. This quote pretty much includes all their Ineos Grenadier accessories.

 

[MrMike]

Thank you so much. Assuming it is 1475mm. But I have no idea what is a bald eagle measurement, lol. Yet, I really like the phrasing, 48.39239 bald eagles ha ha

Sorry yes mm
Glad you like my bald eagle phrase