I have reviewed the various posts on this topic & still can’t find a suitable location to get a Midland MXT275 radio antenna cable through the firewall. The connector is about 3/8” (10mm) in diameter.
I have a US 2025 model Trialmaster with safari windows, front winch, high load aux switching etc. so all the grommet locations in the footwells are used. See pics :
Can I make slit in one of the existing grommets (the large wire loom soft grommets would be easiest I think) then seal with silicone) or are there any other available spots ?
Appreciate any help.
I have a US 2025 model Trialmaster with safari windows, front winch, high load aux switching etc. so all the grommet locations in the footwells are used. See pics :
Can I make slit in one of the existing grommets (the large wire loom soft grommets would be easiest I think) then seal with silicone) or are there any other available spots ?
Appreciate any help.
