Factory Rhino Rack information needed

[4x4Brick #1561]

Anyone know the model number of the Grenadier factory full length Rhino Rack? I asked back in 2024 to Rhino and was told it was a 'special' Ineos only rack which I'm fine with but it becomes problematic when accessory folks keep asking me for my make and model of the rack. Even if it is a Ineos special a model number or even better a diagram showing size, spacing and gaps would be helpful. Of course I've gone out and measured it myself but still hard to do online and vendor shopping without a 'Similar to a 5 series but with a 2" gap instead of 1" or whatever' so the vendors have something to reference.

 

[Logsplitter]

The actual platform is a Rhino rack Pioneer which I believe are all the same. The side mounting rails for the Grenadier are the only items specific to the Grenadier is my understanding. Of course size maybe slightly different.

 

[TheDocAUS]

The RR Pioneer Platform is exclusive to INEOS, I do not know for how many years (but it is not on RR's main website). The RR for the Grenadier can only be purchased through INEOS dealers.

Rhino Rack Pioneer Platforms do vary in length and width, depending on the car. The Pioneer Platform on my Nissan Patrol was narrower than the one on my Grenadier.

There is some Rhino Rack information here: INEOS Fitting Guides here, at least 9 guides from INEOS and Rhino Rack. Some additional links on the US website here;

Taken from here:

Links for new owners and also various Installation Guides (including those from INEOS & Rhino Rack)

May 4, 2025

Helpful links for new owners

• TheDocAUS
• beginner busbar charger filters fuses guides help how to roof rack torx
• Resources, Maintenance Tutorials, Procedures and guides.

 

[m16magni]

Anyone know the model number of the Grenadier factory full length Rhino Rack? I asked back in 2024 to Rhino and was told it was a 'special' Ineos only rack which I'm fine with but it becomes problematic when accessory folks keep asking me for my make and model of the rack. Even if it is a Ineos special a model number or even better a diagram showing size, spacing and gaps would be helpful. Of course I've gone out and measured it myself but still hard to do online and vendor shopping without a 'Similar to a 5 series but with a 2" gap instead of 1" or whatever' so the vendors have something to reference.

I have the "3/4" size Ineos Rhino 6F rack for my Grenadier Station wagon which has the Rhino Pioneer 5 Platform with the Ineos legs. It fits all of the Rhino rack accessories for the ubiquitous Pioneer 5 platform and can be identified by its keyhole channel recesses which no longer exist in the 6 series.
It is likely that the full length Ineos rack is also the platform 5 series.

Differences between Pioneer platform 5 and 6 series.

View: https://www.youtube.com/watch?v=hLQx253O3A4


As has been pointed out by others the legs are a proprietary Ineos product developed in conjunction with Rhino Rack but not available for purchase from Rhino rack.

Mark