Dobinson drawers fit!

[JimnyXL]

View: https://youtu.be/QKuN10lQ6uw?si=HCwApnhT6pEs1j4c

https://exitoffroad.com/product/dobinsons-rear-dual-roller-drawer-kit-with-fridge-slide-and-tie-down-points-universal-mount-36-x-40-x-10-inches/

I measured a few times and took a risk to see if these drawers would fit. Got lucky and they fit great. No drilling needed either. Mounted to L track mounts. Gonna do the universal wings trim to fit finishing kit when I have time.


Had to remove my door table for this setup to work.

 

[JimnyXL]

Here's how I bolted it down. Opted to keep the L-Track rails installed under the box as it made it possible to secure the box without drilling new holes. The universal wing kit is going to be some work though to finish out the sides. Also here's the height difference of the rear seat when folded flat. Sits roughly 3.5" higher than the rear seats.

I used some other carriage bolts I had laying around that fit + nylock nuts, but these bolts may fit height wise.

Amazon.de : PALOZO L Track Threaded Stud Fittings L-Track Threaded Double Stud Lug Fitting Tie Down, Used with L Track Rails for Truck Bed or Trailer Cargo Control, Pack of 10, Black, 30MM

 

[JimnyXL]

Finished out the drawer sides.