The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.

AUSTRALIA: Third party suppliers for the Grenadier

Fire extinguisher bracket
Euro Flo fire extinguisher bracket, can mount Fire Strykers and also a standard style fire extinguisher:


2000_6865e222cf2fc.jpg

2000_6865e2601e7a9.jpg
 
Links Resources update
I have added another 10 links in the Resource section. If the link has XXXX, it is a forthcoming product or I am waiting on a link or new information is expected in that thread or work in progress.

The new links under Heading 2 will be formatted with purple colouring in due course, it just makes it easier to see the new links as they are black, for now.

 
Last edited:
The INEOS ANZ Cab Chassis "Kaiju" build is at Purnell Adventure in Sydney for a couple of weeks.
 
I went to Purnell Adventure and had a look at INEOS' Kaiju beast. Some observations:
  1. massive 35 inch tyres, but it works with the lift;
  2. JMACX suspension is really well engineered. The car has an electronic shock controller near the driver, but that option is not offered on the JMACX website (manual only);
  3. it is a beast;
  4. looks like they use a slimline battery behind the RedArc panel - at least that is where all the cables seem to go. Very slick cable work;
  5. Redarc Black Alpha 50A charger;
  6. 2000W RedArc Black Alpha Inverter;
  7. 168 aux fuel tank, with the standard 90 litre - giving 258 litres in total;
  8. Bushmann upright fridge;
  9. STEDI lights on the across the front of the roofrack, above rear doors and in inside and outisde the canopy;
  10. the NORWELD tray/canopy has amazing quality of build;
  11. the setup was around AUD40,000;
  12. it had a GVM upgrade which is going to be must do for any build this size.
My Grenadier has 8 "campaigns" to do, most minor. So booked it in for those and a service. Main campaigns were new door locks, key and the new engine cover, with more insulation so it does not catch fire, plus new firmware.
 
NEW LINK
Trig Point Slider Steps added (item 2), thanks to @Znarfgh

Trig Point offer QM and Grenadier models at a reasonable cost.

ROCK SLIDERS/SIDE STEPS/SIDE PROTECTION (Grenadier sliders and steps do NOT fit a QM)
  1. INEOS offers rock sliders and steps are an accessory (QM and Grenadier options);
  2. Trig Point Slider Steps here (QM and Grenadier options);
  3. Black Sheep steps that can be fitted to the INEOS Rock Sliders here;
  4. Black Sheep Innovations Australia Steps/Rock sliders here (also XHQ here);
  5. Gren X Rock sliders here;
  6. Jef Fab Customs Rock sliders here;
  7. DMW Rock Sliders here (combination rock slider and step);
  8. ABNTR4x4 Rock Sliders here;
  9. XLW Parts Sill Protector, Rock-Slider and Step here;
  10. LeTech Off-Road Running Board here;
  11. For a global list of rock sliders look here; and
  12. Grenadier sliders and steps do NOT fit the QM. Buy the QM model.
 
Last edited:
KickAss has up to 50% off on dual battery kits up to midnight tonight.

 
NEW SINGLE AIR COMPRESSOR MOUNT IS COMING
A new air compressor mount is coming from Euro Flo Expedition. It goes where the jack is stored. Single ARB Air Compressor. I am reliably informed there is a coming Canny Outdoors video on the mounting bracket.

With a 50% jump in air flow with the new ARB brushless compressors, single compressors are becoming a more appealing option, if you do not require redundancy.


2000_68412b80d6cf2.jpg

Now installed in John Canny's Grenadier. The bracket gets a mention with a photo at 11:20 in his new video. Just click on the video to see it play over at Youtube.

View: https://youtu.be/adgpmgWRv4I?t=685
 
  • Like
Reactions: Max
New link added. The Front Runner ladder does NOT offer a Jerry Can holder. Thanks to @beefs

REAR LADDERS (SOME WITH JERRY CAN HOLDER)
  1. GrenX rear ladder with Jerry Can holder here;
  2. LeTech rear ladder with Jerry Can holder from XHQ here; and
  3. Front Runner rear ladder (with NO Jerry Can holder), look here.
 
Back
Top Bottom