Tom109
Grenadier Owner
My Dad was quite the false economist before he met my Mom. One day, as he passed a flea market, it began to rain. He bought a cheap umbrella. He opened it up. It was full of holes.Buy once, cry once
The 67d bracket and clamp seems to have some good adjustability to it by tilting the clamp (affixed to the oem mirror ball/post) position. I’ve found a good position on mine without needing any additional pieces/arms - I’ve placed the clamp/ball at about the 4 or 5 o’clock position which lowers the mirror by about an inch or so from what is shown on their website. Not sure I’d move mine any lower, as it feels like it might then be too low into the drivers view through the windscreen. But yeah, I would imagine you could definitely fit one of their nano ball arms on it if wanting more adjustment.Bruce - I asked them if a longer ball arm could be supplied. I’ll let you know if they reply.
Just went out and snapped a photo of the positioning of mine - the top of the wolfbox sits just over 2” below the switch panel, and is just less than 7” from the bottom of the wolfbox to the top of the infotainment screen. Also, you can see I have the wolfbox as far to the left that it can go without being in the way of the drivers visor. This is in my opinion the best positioning for the mirror (not because of the mount), but because of the larger size of the wolfbox mirror + the limited visibility in the very short windscreen + the large ADAS camera housing.I asked if a longer ball arm could be added. Below is their reply.
“The answer is no. There is no arm involved. We understand the issue with the ADAS box/camera proximity and have seen client images. The geometry is such a drop in the camera would not work for visibility reasons in the short IG windshield. ”
I agree. The pictures are not very helpful.Would be nice if they put some photos of the mount components without phones and GoPros on their site. In particular, I'm wondering if the ball mount is compatible with Quad Lock ball arms, which is the system I use in all of my vehicles and dirt bikes.
Apologies only seeing this now. I'll send a photo of the mounts without the clamps and connectors for the devices shortly, although, it's a typical 67 designs typical arm end which look similar to this:I agree. The pictures are not very helpful.
Wondering if anyone has bought it now and could share some pictures of the mounts? Maybe @GrenADV please?
Anyone have an answer? Do I need to drill into my dash to install this mount or is self tapping screws enough?Does this drill into the dash?