3D print files for overhead switch labels?

[cdsvt]

I'm just dabbling in 3D plastic printing. My son left for university and left behind his Ender 3D printer. So far I've been able to download STL files, rotate them, slice them, put them on a memory card, and print them.

I've seen some people have made plastic angled labels to help identify the purpose of the overhead switches without having to be a contortionist.

Does anyone have a STL file for this type of switch label?

If not, I guess my next journey is learning how to design parts. Honestly, that feels really daunting, so I'm hopeful that someone smarter than me has already figured this out and I can just print them.

Thanks in advance for any leads.

 

[Greg]

I have added the .stl that I used to the resource section.
Overhead Button Labels
(may take a while for resource to be approved and become visible)

The downside for you maybe is that I used Bambu Studio to add the text - so the .stl is just a blank label.
It was raised text in a different colour, so it was easier for me this way rather than having multiple .stl to be put together.

This is what mine look like

 

[Ovrland Bill]

I'm just dabbling in 3D plastic printing. My son left for university and left behind his Ender 3D printer. So far I've been able to download STL files, rotate them, slice them, put them on a memory card, and print them.

I've seen some people have made plastic angled labels to help identify the purpose of the overhead switches without having to be a contortionist.

Does anyone have a STL file for this type of switch label?

If not, I guess my next journey is learning how to design parts. Honestly, that feels really daunting, so I'm hopeful that someone smarter than me has already figured this out and I can just print them.

Thanks in advance for any leads.

I am quite happy with the “angled labels” I purchased from (?) Overland Gear Guys.

 

[chrsbe]

I'll print them.Very good job!

 

[chrsbe]

I have one more question. (it’s a professional reflex) I noticed you’re using lowercase letters instead of uppercase, like Ineos does. Did you match the font?

 

[Greg]

I have one more question. (it’s a professional reflex) I noticed you’re using lowercase letters instead of uppercase, like Ineos does. Did you match the font?

Nah, just used a font I like.
I find title case easier to read at a glance.

 

[cdsvt]

I have added the .stl that I used to the resource section.
Overhead Button Labels
(may take a while for resource to be approved and become visible)

The downside for you maybe is that I used Bambu Studio to add the text - so the .stl is just a blank label.
It was raised text in a different colour, so it was easier for me this way rather than having multiple .stl to be put together.

This is what mine look like
View attachment 7920474

This is perfect. Hopefully the admins approve it. It would give me a huge jumpstart! Thank you!

I am quite happy with the “angled labels” I purchased from (?) Overland Gear Guys.

They're great too, but last time I looked they were out of stock. They're also spendy for something I can print myself with materials I already have.

 

[Krabby]

Nah, just used a font I like.
I find title case easier to read at a glance.

Hi - I don’t see any pending uploads on my end. I’ll reach out to @Stu_Barnes and check on it. It’s certainly a great idea and one I’ll be taking advantage of!