They are for the seat belts warnings.Hi together,
does somebody knows what these wires are? They do go to the back of the car and before I start ripping it all apart I thought somebody here has an idea….
Thanks in advance.
View attachment 7843560
Jean- thank you very much. I guess you really know each wire in the car! Very impressive Sir! Again- thanks.They are for the seat belts warnings.
I see they didn't replace yet the "out" screw of your SmartPass (the one with the red triangle) by a dummy plastic one. I give you the advice to remove it before going to your dealer if you want to keep it!Jean- thank you very much. I guess you really know each wire in the car! Very impressive Sir! Again- thanks.
I am looking for a short way to get power to the backside of the backrest. The one power outlet in the boot is a bit insufficient. Will look further than….
Jean- as you can tell I am not an electrical ing. Could I use that „out“ with the red triangle as a power source for the boot?I see they didn't replace yet the "out" screw of your SmartPass (the one with the red triangle) by a dummy plastic one. I give you the advice to remove it before going to your dealer if you want to keep it!
What happens is that, although the Smartpass is designed for it, Ineos doesn't want users to use it as a power source. Don't ask me why, they never gave a decent explanation.Jean- as you can tell I am not an electrical ing. Could I use that „out“ with the red triangle as a power source for the boot?
So - I have to bring the car for the 20.000 inspection next werk and will take out the screw as per your advice.
However, why should they renove the screw and replace it by a plastic dummy? One could simply put a new screw in after they removed it…..or do I get you wrong?
Thanks again for your thoughts Sir
Michael