the place to upload your MOAB images for the community
The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please contact admin@theineosforum.com for a commercial account.

Replaced the OEM plugs next to the wipers

LAdrummer

Grenadier Owner
Local time
2:56 AM
Joined
Oct 23, 2023
Messages
31
Location
Los Angeles, CA, USA
I’m not sure if any other owners have experienced this but the 18mm locking plugs next to the windshield wipers keep falling out. Not so locking after all. I replaced them with 7/8” plugs from of all places ACE Hardware (USA). The new plugs won’t pop out, won’t be lost, won’t frustrate me. I did have to bore an ever so slightly bigger hole. The new plugs can be removed.
All the best,
MM
 

Attachments

  • phonto.jpeg
    phonto.jpeg
    571.6 KB · Views: 8
  • IMG_5690.jpeg
    IMG_5690.jpeg
    3.5 MB · Views: 8
  • IMG_5692.jpeg
    IMG_5692.jpeg
    3.9 MB · Views: 7
  • IMG_5693.jpeg
    IMG_5693.jpeg
    4 MB · Views: 6
  • IMG_5683.jpeg
    IMG_5683.jpeg
    2.9 MB · Views: 7
These silicone versions have been working well also and go in without any mods. IIRC, the original recommendation from the forum was 19mm but I accidentally ordered the 18mm. The 18mm have stayed in place and were fussy enough to get in, I don’t think they’ll come out unless you get in there with a panel removal tool.

 
Back
Top Bottom