Power Steering Error (solved)

[303ChickenMan]

Hey fellow early adopters!

I’ve been dealing with a power steering error on my ‘24 Trialmaster for about a month. It turns out having my Bluetooth OBD reader (OBDLink MX+) plugged in while driving was throwing the error. I haven’t seen this posted on the forums (apologies if it’s already been solved and posted elsewhere!). I’ve not had the error since unplugging it about 500 miles ago. Hope this helps someone in the future!

 

[anand]

It isn't an actual error it's a "feature" of using a scan tool on these vehicles... If plugged in while the engine is running you'll get this with every scan tool (apparently even the factory scan tool).

It's been mentioned a few times before, specifically in the fuel level CEL threads, to make sure you're only scanning/clearing codes with the engine not running.