It doesn't know it's not a Toyota ZF Supra shift install done the hard way.

[INEOS OG]

Well my Supra shifter install was going just swell until I got excited that the Grenadier knob came off the shift lever easily. Yep, you guessed it, I ripped the ribbon connector clean off the Grenadier shifter base.

The good news is the Supra shifter and the Grenadier shifter are physically identical with the exception of the trim ring that goes through the center console and the Grenadier trim clips on to the Supra shifter body.

I have no idea will happen when I plug this in and start it up but I will let you know but everything else has been an easy swap once you dismantle the console.

 

[Krabby]

Just need @GrenadierUSA to make new cup holder/console covers with a Supra appropriate cutout instead of the BMW one. That way you can simply swap the entire unit.

 

[INEOS OG]

Naw, it is mostly back together. I actually have their center console cup holder assembly and unfortunately the cup holder unit came out in pieces. I already reached out to Brad to see if he can print me another cup holder.

I don't recommending doing it this way but if you do buy a Supra ZF shifter don't discard the base it is the same ZF unit used in the Ineos.

 

[INEOS OG]

Almost good as new. If anyone knows where to source center console screws the IG gods took several of mine hostage during this swap. I left them in the Grenadier USA cupholder and spilled them trying to get the very precisely fit cupholder out of its slot.

 

[Krabby]

Almost good as new. If anyone knows where to source center console screws the IG gods took several of mine hostage during this swap. I left them in the Grenadier USA cupholder and spilled them trying to get the very precisely fit cupholder out of its slot.

View attachment 7900715

Side note - is this the ring on the end of your hand brake HERE?

 

[INEOS OG]

Side note - is this the ring on the end of your hand brake HERE?

The link above is dead. I found it on amazon mine self destructed. it came with a button but I just replaced the trim ring. Blsck was the closest thing to gray at the time.

Amazon.com: Qiosreui Turn Knob Drift Button Replacement Part Compatible with Ineos Grenadier 2020-2024 Accessories, Drift Handbrake Button E-Brake Handle Handbrake Emergency Cover, ABS (Glossy Black) : Automotive

Amazon.com: Qiosreui Turn Knob Drift Button Replacement Part Compatible with Ineos Grenadier 2020-2024 Accessories, Drift Handbrake Button E-Brake Handle Handbrake Emergency Cover, ABS (Glossy Black) : Automotive

a.co