Emissions solenoid connector

[Sammcdonald]

Please can anyone tell me what the small plastic connector is and where I can buy a new one as this has cracked at the end that joins one of the emissions recirculating solenoids and I need a new one please!
UK based parts if possible pleaseView attachment 7902866

 

[Clark Kent]

Please can anyone tell me what the small plastic connector is and where I can buy a new one as this has cracked at the end that joins one of the emissions recirculating solenoids and I need a new one please!
UK based parts if possible pleaseView attachment 7902866

You're in luck Sam, kinda.

There is an open service campaign to replace those coupling ends due to cracking. Talk to your agent.

This is the Ineos work order number, not the part number.
MWO002880-EGR MODULE COUPLING ROD.

You might be able to reconnect the link temporarily by reassembling it and securing it with a cable tie or a small hose clamp around the socket.

If you're desperate and cannot get to an Ineos agent it might be BMW PN 11719887735 based on a current X5 parts diagram. See item 4, Pushrod. A BMW part should be a direct fit but I would physically check at a BMW service department before ordering and paying.

 

[landmannnn]

Mine has done a similar thing, just a crack at the moment.

 

[Rab]

Should have been part of your recalls, mine were changed September 24.

 

[landmannnn]

Should have been part of your recalls, mine were changed September 24.

That's annoying, I had mine serviced in May.

 

[Clark Kent]

I'm at my agent currently to get some campaigns completed and they found both of the EGR couplings are cracked. No parts in stock

 

[landmannnn]

I've just ordered one of those mentioned by ,@Clark Kent, see if it fits. At about €18 it is better than a six hour roumd trip to an Ineos dealer