Sprinter van wheel

[TheGoodHeartedgreen]

Can anyone confirm that the sprinter van wheel hub flange is the same diameter as the Grenadier. I want to keep the steelies but want to utilize a slip over hub spacer that rides over the hub like what OWL has for the sprinter vans. Its a much safer option than a bolt on spacer. I dont want much extra width, would just like them to be not so tucked.

Thanks in advance.

 

[Tom D]

Try these, I have a set, -35 off set so 20mm wider than stock, no need for spacers….

17X8 JOHN RED STEEL BLACK MATT RIMS WHEELS 6X130 ET35 MERCEDES SPRINTER 2007+ | eBay UK

17X8 JOHN RED STEEL BLACK MATT RIMS WHEELS 6X130 ET35 Hub Bore: 84,1MM. Model: A15 BLACK MATT. Finish: Black Matt. Before buying, make sure that the product is available. Offset: 35.

www.ebay.co.uk

 

[rob88]

Can anyone confirm that the sprinter van wheel hub flange is the same diameter as the Grenadier. I want to keep the steelies but want to utilize a slip over hub spacer that rides over the hub like what OWL has for the sprinter vans. Its a much safer option than a bolt on spacer. I dont want much extra width, would just like them to be not so tucked.

Thanks in advance.

The Grenadier hub pilot diameter is 130mm. The newer Sprinter vans (VS30) use a 120mm hub. They are not the same.

You cannot use a Sprinter-specific hub-centric spacer on a Grenadier. You will need to find a spacer specifically made for the Grenadier's 130mm hub and 6x130 bolt pattern.

 

[MartinK]

Good Rob clarified! I have a 4x4 Sprinter, I was going to try a swap!

 

[Tom D]

The older sprinters are a 6x130 pattern same as the Grenadier. But wheel widths and offsets are often different.

 

[pmatusov]

Yes, the 6-lug Sprinter wheel has the same hub diameter and bolt pattern. It is 6.5" wide, narrower than the Grenadier's 17" steelies.
You will need 6mm or 1/4" thick spacer to clear the brake calipers - the wheels have deeper offset. You will also need domed (not cone) lug nuts, Porsche style.
Amazon has them.

 

[Shopkeep]

Not sure if you have seen this post, he is using 16” Sprinter wheels successfully.
Post in thread 'Death wobble'
https://www.theineosforum.com/threads/death-wobble.12419983/post-1333364332